Overview
The Tuff Country 62232 is a front SX6000 shock absorber for 4 inch lifts, with a twin-tube design, multi-stage valving and polyurethane bushings. It is a hydraulic unit with a cellular gas charge that limits fading. It covers Chevrolet and GMC pickups and SUVs, Ford F-series and Bronco models, Dodge and Ram trucks, the Jeep Wrangler JK, and the Toyota 4Runner and pickup from 1978 through 2014.
Silverado and Sierra 1500, 2500 HD and 3500 HD models make up most of the list. It also includes the F-150 from 1977 to 2003, Super Duty pickups from 2005 to 2014, the Ram 2500 and 3500 from 2011 to 2013 and 2011 to 2012, and the Wrangler JK from 2007 to 2014.
Key features
- Lift note of w/4 in. Lift
- Multi-stage valving for a controlled ride
- Polyurethane bushings
- Cellular gas charge helps limit fading
- Front position in the specifications
- Twin-tube design
Setup for a 4 inch lift
A front shock on a lifted pickup carries more of the load than stock, because the suspension geometry changes once the ride height goes up. Check that the upper and lower mounts line up with the lift brackets, and confirm the shock length at full droop and full compression before the vehicle leaves the driveway. A mismatch here can cause bottoming or binding over bumps.
Cellular gas charge designs are often chosen for longer runs over rough ground, since the gas helps keep damping steady as the shock heats up. Replace front shocks as a pair so both sides respond alike, and consider the steering components, track bar and ball joints when they show wear. Look for oil on the body, cracked bushings and a loose feel at the steering wheel as signs the unit is worn.
- Inspect both mounts for wear and looseness
- Replace front shocks in pairs
- Recheck bolts after the first few trail runs
Specifications
| Brand | Tuff Country |
|---|---|
| Part number | 62232 |
| UPC | 10698815622325 |
| Series | SX6000 |
| Position | Front |
| Design | Twin-tube, cellular gas charged |
| Attribute | Hydraulic / gas charged: Hydraulic |
| Valving | Multi-stage |
| Bushings | Polyurethane |
| Lift height note | w/4 in. Lift |
| Sold as | Individually |
Vehicle fitment
Coverage runs from 1978 through 2014. Chevrolet models include the Avalanche 2500 from 2002 to 2003, the Silverado 1500 from 1999 to 2006, the Silverado 2500 HD from 2001 to 2013, and the Silverado 3500 HD from 2007 to 2013. GMC models include the Sierra 1500 from 1999 to 2006, the Sierra 2500 HD from 2001 to 2013, and the Sierra 3500 HD from 2007 to 2013. Ford models are the Bronco from 1978 to 1996, the Bronco II from 1984 to 1990, the F-150 from 1977 to 2003, the F-250 from 1980 to 1987, and the Super Duty F-250 and F-350 from 2005 to 2014. Dodge and Ram models are the Ram 2500 and 3500 from 2003 to 2010 and the Ram 2500 and 3500 from 2011 to 2013 and 2011 to 2012. The Jeep Wrangler JK fits from 2007 to 2014, and Toyota models are the 4Runner from 1984 to 1985 and the Pickup from 1980 to 1985.
The list does not include the Ram 1500, the Jeep Wrangler TJ or LJ, or Ford F-150 models from 2004 on. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The lift note reads w/4 in. Lift, so check your front ride height against that setup before installing. Front shock changes on a lifted vehicle usually call for an alignment check afterward.
What’s included
One front SX6000 shock absorber, sold individually.
Not included: The matching front shock on the other side, since this item is sold individually.









