Overview
The California Super Trucks CSR-5526 is a rear 2.0 non-reservoir shock absorber for Chevrolet Silverado and GMC Sierra trucks from 2001 to 2018, covering 1500 through 3500 HD models.
It is a gas-charged design with a w/6 – 7.5 in. Lift rating. It is built in the U.S.A., uses bushing mounts rather than heim joints, and comes with all required hardware.
Key features
- Rear position, 2.0 non-reservoir design
- Gas-charged construction
- Bushing mounts, with no heim joints to press out
- Required hardware included
- Lift rating of w/6 – 7.5 in.
Rear shock role and wear
A rear shock controls how the axle rebounds after bumps and how the body settles when the bed is loaded or a trailer is attached. Gas-charged designs resist foaming when they heat up on long grades, which keeps damping more consistent. Rear shocks often wear sooner than front ones because they carry more load, so the condition of the rear damping has a direct effect on ride control.
Look for oil on the body, clunking over small bumps, or a rear end that keeps rocking after a stop. Bushing mounts should be checked for cracks and play at each service. When the rear springs or leaf packs are replaced, inspect the shocks too, since changed ride height can change the load they carry.
Specifications
| Brand | California Super Trucks |
|---|---|
| Part number | CSR-5526 |
| UPC | 70000697201 |
| Position | Rear |
| Design | 2.0 non-reservoir |
| Shock type | Gas charged |
| Lift height | w/6 – 7.5 in. Lift |
| Mounts | Bushings |
| Fitment type | Direct Fit |
Vehicle fitment
It fits the 2014–2018 Chevrolet Silverado 1500 and GMC Sierra 1500; the 2001–2004 Silverado and Sierra 2500; the 2001–2018 Silverado and Sierra 2500 HD; the 2001–2006 Silverado and Sierra 3500 with 2007 Classic models; and the 2007–2018 Silverado and Sierra 3500 HD. Trims include Custom, High Country, LS, LT, LTZ, SSV, WT, Base, Denali and SLE.
Not covered: half-ton Silverado and Sierra 1500 models from years before 2014, and any model or year not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mounting uses bushings, so the factory heim joints are not pressed out. Check the w/6 – 7.5 in. lift range against your build before installing.
What’s included
All required hardware is included with the shock.









