Overview
The 19270 is a 2 inch lift rear leaf spring measuring 52 inches long, with polyurethane bushings included. It is a direct fit for 1973 and 1975–1991 Chevrolet and GMC trucks and SUVs. Two springs are required for this application.
Leaf springs carry much of the rear axle load, so this part suits owners who want a 2 inch rear lift on the listed GM models. Tuff Country describes its leaf springs as durable and smooth riding, and the 19270 is built as tapered, snub rolled and pre-set leaves.
Key features
- 2 inch lift rear leaf spring, 52 inch length
- Tapered and snub rolled leaves
- Teflon padded
- Pre-set spring design
- Polyurethane bushings included with each spring
- Lift height range: 0 to 4.99 inches
- Direct fit for the Chevrolet and GMC models covered below
Rear axle basics
The rear leaf springs carry most of the axle load and control its position under the frame. A 2 inch rear lift changes the spring’s arch and the angle of the axle, so the rear suspension should be checked after the swap. Shackles and bushings work with the spring and wear together.
Heavy cargo or a trailer hitch puts extra stress on the springs and the mounts. If the truck sits lower on one side or squats under load, check the leaves for sag or breakage. Replacing the bushings while the spring is out is a practical step.
- Inspect shackles and their bushings
- Check the U-bolts and spring perches
- Look at rear shock length after the lift
- Confirm driveshaft angle at the rear joint
Specifications
| Brand | Tuff Country |
|---|---|
| Part number | 19270 |
| UPC | 70000474816 |
| Position | Rear |
| Spring quantity | Single spring (2 required) |
| Spring length | 52 inches |
| Lift | 2 inch |
| Lift height range | 0 to 4.99 inches |
| Bushings | Polyurethane, included |
Vehicle fitment
The manufacturer list covers Chevrolet Blazer, K10, K10 Suburban, K20, K20 Suburban and K5 Blazer models, GMC Jimmy, K15, K25, K1500, K2500 and Suburban models, and the 1986 GMC C2500 Suburban, with trims named for each entry.
Model years after 1991 are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Support the frame or axle on stands before removing a leaf spring, because the spring carries axle load.
What’s included
One rear leaf spring with polyurethane bushings. Two springs are required per application.









