Overview
The Rubicon Express REA1014 is a black powder-coated steel transfer case skid plate for the 2007–2018 Jeep Wrangler JK. It guards the transfer case from rocks and other obstacles on the trail.
It is one piece of a modular skid plate system, so plates for the engine oil pan and fuel tank can be added later. It is designed to work with all Rubicon Express suspension systems, so it is not tied to one lift setup. The plate is CNC laser cut from 3/16-inch steel and mounts up tight to the drivetrain to keep ground clearance.
Key features
- CNC laser cut from 3/16-inch steel for protection against impacts
- High, tight mounting close to the drivetrain to help preserve ground clearance
- Black powder coat finish
- It reduces obstacle hang-ups and improves slide-over on terrain.
- Part of a modular skid plate system, so other plates can be added later
Skid plate system and clearance
A transfer case skid plate sits under the most exposed part of the drivetrain, where rocks and stumps can strike first. The plate spreads the load of an impact across its surface so the transfer case housing and its fasteners are protected. Because the plate mounts close to the drivetrain, it also keeps the lowest point of the vehicle higher than an open case would be.
Skid plates are often added in stages, starting with the component most likely to be hit. Check the plate and its fasteners after trail use, looking for bent edges, loose hardware and chips in the powder coat, since bare steel can start to rust where the coating is damaged.
- Check the mounting bolts after trail use
- Touch up chips in the powder coat
- Keep the plate clear of the exhaust and linkages
- Plan other plates by the components most at risk
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | REA1014 |
| UPC | 614901148916 |
| Position | Transfer case |
| Type | Transfer case skid plate |
| Material | 3/16-inch steel |
| Finish | Black powder coat |
| Installation type | No cutting or drilling required |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK), including 2-door and 4-door models.
The list covers only the JK generation. Earlier Wrangler models (TJ and LJ) and the JL generation are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The plate mounts with the vehicle’s existing hardware. Rubicon Express says no cutting, drilling or modification of existing components is needed.
What’s included
One transfer case skid plate. Mounting uses the vehicle’s existing hardware and fasteners, which are not supplied with the plate. Plates for the engine oil pan and fuel tank are separate parts, added as needs and budget allow.


