Overview
The Trail Gear 110051-1 is a U-bolt washer that sits between the nut and the spring or axle to spread the clamping load. It has a 15mm inside diameter and 3/16 in. thickness.
Washer dimensions matter when a U-bolt is tightened, because the inside diameter has to clear the U-bolt threads. Check the 15mm inside diameter against your U-bolt and nut before you commit to this part.
Washer role in U-bolt clamping
A washer under a U-bolt nut spreads the clamp force over a wider area, which keeps the nut from digging into the spring pack or the axle seat. A thin or undersized washer can crush or mark the surface, and the clamp can loosen over time as the marked surface settles. Washers that are flattened, cracked or pitted should be replaced rather than reused.
Sizing is the main check. The inside diameter has to clear the U-bolt threads without binding, while the thickness affects how far the nut sits on the thread. Keep washers matched in pairs on each U-bolt so the clamp load stays even. Clean faces on both sides of the washer help it seat flat, which makes torque readings more consistent.
- Measure the U-bolt thread before ordering
- Inspect washers for flattening or cracks
- Replace washers with the U-bolt set when worn
- Keep washer faces clean and flat
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 110051-1 |
| UPC | 700007697641 |
| Type | U-bolt washer |
| Inside diameter | 15mm |
| Thickness | 3/16 in. |
Vehicle fitment
Fit depends on the vehicle’s year, model and axle. Measure your U-bolt and nut, then confirm the inside diameter clears the threads before using it.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The package is one U-bolt washer. Check the package contents against your installation before starting, including nuts and U-bolts.








