Overview
The Trail Gear 130033-1-KIT is a steering box plug kit that includes a 1/4 in. NPT plug fitting for steering gear box work. Trail Gear marks it as universal fit, so it is not tied to one year, make or model.
The kit is a small steering component, and its 1/4 in. NPT thread is the key fit point. Match it to the port you intend to close before you begin.
Sealing unused steering ports
Unused ports on a steering gear are closed with plugs so fluid and dirt stay out of the open passage. A plug must match the thread and seal type of the port it closes, because a mismatch can leak or work loose under pressure. Clean the port face and inspect the threads before threading a plug in.
Plugs are often handled during steering gear service, pump replacement or hose rework, so keep spare fittings clean and capped. Before removing a plug, relieve any residual pressure and drain the fluid where practical. Tighten to the value in the service documentation, and check for weeping after the system is refilled and run.
- Confirm thread and seal type before fitting
- Clean the port face before installing
- Keep spare plugs capped and clean
- Check for leaks after refilling the system
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 130033-1-KIT |
| UPC | 70000621581 |
| Included fitting | 1/4 in. NPT plug fitting |
Vehicle fitment
Trail Gear marks this kit as universal fit, so it is not written for a particular year, make or model. Check that the 1/4 in. NPT thread matches your steering box port before installing.
What’s included
The kit includes a steering box plug and a 1/4 in. NPT plug fitting.









