Overview
The Trail Gear knuckle stud nut, part number 140055-1, is factory Toyota knuckle hardware. It fits the front solid axle knuckle on 1979-1985 Toyota vehicles and the 1990-1997 Toyota FJ80 Landcruiser.
This nut is identified by part number, UPC and fit.
Knuckle stud nut torque and fit
A knuckle stud nut clamps the knuckle to the axle assembly, so its seat and thread engagement directly affect how the joint holds under load. The nut needs to bear evenly on its seating surface, and the threads must engage fully. Partial engagement or a tilted seat can let the nut loosen under repeated flex.
Before installing, inspect the nut threads for stretching, cross-threading or rust, and clean the stud and seating surface. Lubrication should follow the procedure for your vehicle, since the wrong lubricant can change clamping force. Tighten to the torque your vehicle’s repair procedure requires, working evenly rather than in one pass.
After the first drives, check the nut for movement and look for rust trails or dirt lines around the nut face, which show the joint is shifting. Retighten or replace the nut as needed, and inspect the stud before continuing.
- Inspect the threads before fitting
- Clean the seating surface
- Re-check the nut after the first drives
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 140055-1 |
| UPC | 70000621575 |
| Part type | Knuckle stud nut |
| Stated fit | 1979-1985 Toyota front solid axle knuckle; 1990-1997 Toyota FJ80 Landcruiser |
Vehicle fitment
It fits the 1979-1985 Toyota front solid axle knuckle and the 1990-1997 Toyota FJ80 Landcruiser, with fit given by year range for each application.
For other Toyota knuckles or model years, confirm fit before ordering. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One knuckle stud nut. Have washers or other hardware on hand if your knuckle setup requires them.









