Overview
The Trail Gear 111266-1-KIT is a weld-on front spring hanger made for 47 inch front leaf springs on Toyota pickups and 4Runners. It is a hanger only, so bolts and bushings are not included.
It fits 1979-1995 Toyota Pickup and 1984-1995 4Runner models. Installation is weld-on: tube jigs are set on the frame under the cab body mount, the frame is marked and cut with a torch, and the hanger is clamped and welded in place.
Key features
- Weld-on design for frame mounting
- Made for 47 inch front leaf springs
- Hanger only, bolts and bushings not included
- Front position
Weld-on planning
A weld-on hanger ties the spring mount into the frame, so the work is only as good as the layout beforehand. Measure and mark the frame carefully, and confirm that the spring will sit where it should once the hanger is in place. Once welding starts, changes are hard to make, so a dry fit with the spring and shackle is worth doing first.
Frame welds carry suspension loads over the life of the truck, so clean metal and full penetration matter. Because the hanger does not come with bolts or bushings, plan to source matched hardware before the work begins. After the first few drives, check the welds and mounting bolts for cracking or looseness, and recheck them after any change in tire size or spring.
- Dry fit the spring and shackle before welding
- Clean metal and full weld penetration
- Recheck welds after the first drives
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 111266-1-KIT |
| UPC | 70000621548 |
| Position | Front |
| Spring size | 47 inch front leaf springs |
| Mounting | Weld on only |
| Type | Spring hanger |
Vehicle fitment
Trail Gear lists 1984-1995 Toyota 4Runner (DLX, SR5) and 1979-1995 Toyota Pickup (Base, Base Turbo, DLX, DLX Turbo, SR5, SR5 Turbo) for this hanger.
Toyota models outside these lists are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the hanger is weld-on only, it requires frame cutting and welding. Tube holes are cut for the shackle tubes, and those tubes are not included. Welding a frame is work for a qualified fabricator.
What’s included
Spring hanger only.
Not included: bolts and bushings.








