Overview
The Trail Gear 110010-1-KIT is a front spring hanger kit for Toyota pickups and 4Runners. It combines a front offset hanger with gussets, frame tubes, greasable shackles and tube jigs, so leaf springs can be hung from a fabricated frame mount.
It fits Toyota pickups from 1979 to 1995 and 4Runners from 1984 to 1995. It is designed to work with many aftermarket lift springs in the 3 to 6 inch range.
Key features
- Front offset hanger with gussets
- Greasable shackles for the spring ends
- Frame tubes and tube jigs included
- Designed for many aftermarket lift springs from 3 to 6 inch
- Fits 1979-1995 Toyota pickups and 1984-1995 4Runners
Fabrication and fit checks
A weld-in spring hanger kit changes where the leaf spring attaches to the frame, which affects pinion angle, shackle angle and axle position. Before cutting anything, measure the frame, mark the hanger location with the axle and springs in place, and confirm there is clearance for brake lines, fuel lines and the driveshaft. A fabricator who knows frame work can check square and alignment before the final welds go on.
Because lift springs and hanger placement change the way the suspension moves, expect to revisit alignment and shackle angle after the first drives. Greasable shackles should be lubricated on a regular schedule and inspected for play. Check the tube welds and gussets periodically, especially after hard off-road use, and look for cracks around the frame tubes.
- Measure and mark before any cutting
- Check clearance for brake and fuel lines
- Grease shackles on a regular schedule
- Inspect welds and gussets after hard use
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 110010-1-KIT |
| UPC | 70000621386 |
| Position | Front |
| Type | Spring hanger kit |
| Included hardware | Front offset hanger with gussets, greasable shackles, frame tubes, tube jigs |
| Lift spring range | Designed for many 3 to 6 inch aftermarket lift springs |
Vehicle fitment
It fits 1984-1995 Toyota 4Runner (DLX, SR5) and 1979-1995 Toyota Pickup (Base, Base Turbo, DLX, DLX Turbo, SR5, SR5 Turbo).
Toyota models outside these two lines are not covered. The kit’s description cites 1986-1995, so compare your year closely. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Frame tubes and tube jigs point to a weld-in installation. Have a qualified fabricator do the cutting and welding, since frame work is not a bolt-on job.
What’s included
Front offset hanger with gussets, greasable shackles, frame tubes and tube jigs.
Not included: leaf springs.









