Overview
The Pro Comp Suspension 52484B is a rear spring hanger kit made for the 6.5 inch Pro Comp suspension system. The hangers are stronger than factory hanger kits and provide additional lift.
Key features
- Rear position
- Stronger than factory hanger kits
- Adds lift
- Designed for the 6.5 inch suspension system
Drivetrain angles after a hanger swap
Replacing rear hangers changes where the axle sits relative to the frame, and that alters the driveshaft angles. Angles that are too steep can shorten the life of the U-joints and cause vibration at speed. Once the hangers are in and the shackles are fitted, measure the angles and compare them with what the vehicle had before the work started.
Sway bar links, brake lines, and the shock mounts all depend on the new geometry as well. Look for stretch, binding, or rubbing on the brake hose and check that the sway bar links have room to move through full travel. A helper makes the install easier, especially when lining up the hangers and shackles, and it helps to label each part as it comes off.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 52484B |
| UPC | 614901120745 |
| Position | Rear |
| Suspension system | 6.5 inch |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the rear leaf spring setup. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit replaces the rear hangers and adds shackles and sway bar links, so plan the install with a helper and check the drive shaft angles afterward.
What’s included
Spring hangers, shackles, long sway bar links and ES9000 shock absorbers.








