Overview
The Trail Gear 110031-1-KIT is a welded spring hanger kit for hanging leaf springs on 1986-1995 Toyota Pickups and 4Runners. It is built from 1/4 in. plate steel.
It is a direct fit kit, designed to work with many 3 to 6 inch aftermarket lift springs.
Key features
- Welded construction
- 1/4 in. plate steel
- Designed for many 3 to 6 inch aftermarket lift springs
- Fits 1986-1995 Toyota Pickups and 4Runners.
Lift spring hanger fit
A spring hanger carries the spring eye’s load and sets the spring’s position, so its geometry matters as much as its strength. Welded plate construction keeps the hanger rigid under load, and clean welds are worth checking before any installation.
When choosing springs for this kit, compare the spring eye size and mounting holes with the hanger before buying. Aftermarket lift springs vary in length and eye design, so measure them against your existing hanger locations.
Check the hanger and frame for cracks, rust or bent mounts when you remove the old parts. Replacing bushings and bolts at the same time keeps the new hanger aligned with the spring eye.
- Compare spring eye size before ordering
- Inspect welds and plate for cracks
- Check shackle length after the hanger swap
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 110031-1-KIT |
| UPC | 70000621468 |
| Type | Spring hanger kit |
| Construction | Welded |
| Material | 1/4 in. plate steel |
| Spring compatibility | Many 3 to 6 inch aftermarket lift springs |
| Fit type | Direct Fit |
Vehicle fitment
The kit is made for 1986-1995 Toyota Pickups and 4Runners. No trims or chassis codes are identified, so confirm the year and model against your truck.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit is a spring hanger kit. Confirm the included hardware against your installation before starting.








