Overview
The Crown Automotive 52040320 is a spring hanger bracket for the main eye end of a leaf spring, usable at the front or rear. Welding is required to install it, so this is not a bolt-on bracket.
It fits 1987 to 1995 Jeep Wrangler YJ models, and the fitment covers only that model.
Key features
- Mounts at the main eye end of the spring
- Front or rear use
- Welding required for installation
- Fits 1987 to 1995 Jeep Wrangler YJ models
- Crown Automotive part number 52040320
Preparing the mounting area
A spring hanger carries the load of a leaf spring at its main eye, so it sees constant stress every time the vehicle moves over uneven ground. Because this bracket is welded in place, the weld quality and the frame metal around it matter as much as the bracket itself. Before starting, clean the mounting area down to bare metal and check the frame for cracks, rust or previous repairs. Mark the position carefully so the spring sits level and the eye lines up with the bracket.
Spring hangers that are welded in place are often replaced alongside the spring bushings and shackles, since worn bushings can change the spring angle and put extra strain on new welds. After installation, inspect the weld and bracket after the first few drives and periodically afterward for hairline cracks, bent metal or loose hardware. Work carefully on a frame that is raised or supported, and use proper jack stands.
- Clean mounting surfaces to bare metal before welding
- Check the frame for cracks, rust or prior repairs
- Inspect welds and bushings after the first few drives
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52040320 |
| UPC | 848399015027 |
| Position | Front or rear |
| Mounting location | Main eye end |
| Installation | Welding required |
| Type | Spring hanger bracket |
Vehicle fitment
It fits the 1987 to 1995 Jeep Wrangler (YJ) in Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims.
Other Jeep generations and models are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Welding is required, so plan for a welder or shop with the right equipment. Check the package contents against your installation before starting.
What’s included
The bracket is the product itself.
Not included: Welding labor or equipment, which installation requires.









