Overview
The Crown Automotive J5355689 is a spring hanger under part number J5355689, marked direct fit. It may fit the front shackle end or the rear spring shackle bushing, so confirm the position before fitting.
Key features
- Factory replacement design
- Quantity of one, listed individually
- Marked direct fit
Checking position before fitting
A spring hanger carries the end of the leaf spring and gives it a fixed point on the frame, so its mounting holes and angle affect how the spring sits. A hanger that has moved, cracked or worn can allow the spring to walk forward or back, change pinion angle and cause uneven tire wear. Because the position may be front or rear, the hanger has to match where it installs.
Before installation, compare the new hanger with the old one side by side, including hole spacing, bushing bore and overall shape. Mark the frame and spring position before removing bolts so nothing shifts. Use new hardware where the original is worn, and tighten fasteners once the vehicle is at ride height so the bushings are not preloaded.
- Compare mounting hole spacing with the old hanger
- Check the shackle and bolts for wear
- Replace worn bushings along with the hanger
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J5355689 |
| UPC | 848399063578 |
| Position | Front shackle end or rear spring shackle bushing; confirm against the original. |
| Quantity | One |
Vehicle fitment
Direct fit is the only marking, and no vehicle is named. Position matters for this part, so match it to the original hanger you are replacing.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One spring hanger.
Not included: No bushings or shackle hardware are listed.












