Overview
The Trail Gear Solid Axle Swap lift kit A, part number TGI111256-1-KIT, fits the 1995 Toyota Tacoma in the Base and SR5 versions. It is a solid axle swap with a 6 to 7 inch lift range.
It removes the factory IFS suspension components and replaces them with leaf springs and a live or solid axle. Because the front suspension type changes, this is a larger modification than a standard lift.
Key features
- Solid axle swap for the 1995 Toyota Tacoma
- Replaces the factory IFS components
- Leaf springs with a live or solid axle
- Listed lift height range of 6 to 7 inches
Planning the front end work
Converting the front end from independent suspension to a live axle is a project that affects more than height. Steering geometry, brake routing and driveline angles all shift, so expect to revisit several systems after the main work is done. Many builders set aside time for careful measurement before cutting or unbolting anything, since the front wheel position depends on how the axle is located. Careful planning now saves rework later.
On the trail, a live front axle keeps both wheels working together, which many drivers value over rocky ground. On pavement, steering response and braking feel can differ from the stock truck, so a test drive in a safe area helps you learn the new behavior before highway use.
- Steering linkage and tie rod end inspection
- Brake line length after axle movement
- Driveshaft angle and U-joint condition
- Shock and bump stop matching
- Wheel and tire clearance at full articulation
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | TGI111256-1-KIT |
| Kit type | Solid axle swap |
| Front suspension | Leaf springs with live axle |
| Lift height range | 6 to 7 inches |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1995 Toyota Tacoma in the Base and SR5 versions.
Tacoma model years from 1996 onward are not on this list. The 1996–1997 and 1999–2004 kit is a separate part number.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A solid axle swap changes the front suspension geometry, steering and driveline angles. Plan for a complete alignment and driveline check after the work is finished.
What’s included
The kit removes the factory IFS parts and fits leaf springs with a live or solid axle. Check the package contents against your installation before starting.









