Overview
The Fabtech FTS44288 is an outer tie rod end for 2012–2015 Ram 1500 and 2013–2017 Ram 3500 trucks. It is used with PN K3055, K3055M, K3055DL and K3058DL.
It is a heavy duty upgrade over a standard replacement end, designed for steering strength and service life.
Key features
- Outer position
- Heavy duty design
- Direct fit.
- Ram 1500 and Ram 3500 trims listed in the fitment data
Ram tie rods under heavy use
Ram pickups are often used for towing, hauling and off-road work, all of which load the steering linkage. The outer tie rod end absorbs side loads from the wheel and keeps the steering geometry stable. Under heavy use, joints wear sooner, so a regular check of the boot and joint pays off.
When the new end is installed, the adjuster should be set so the steering wheel sits straight with the wheels aligned. Confirm the sleeve and jam nut are tight afterward, and inspect the drag link and pitman arm for play at the same time.
Trucks that tow or drive on rough roads benefit from keeping the joints clean and greased. Good boots and fresh grease help the end resist dirt and water, which are the main causes of early wear.
- Check the boot after towing or off-road use
- Inspect the drag link ends for play
- Confirm the jam nut is tight after toe is set
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS44288 |
| UPC | 674866103191 |
| Position | Outer |
| Use with | PN K3055/K3055M/K3055DL/K3058DL |
| Fitment type | Direct Fit |
Vehicle fitment
The 2012 to 2015 Ram 1500 is listed in Big Horn, Express, Laramie, Laramie Limited, Laramie Longhorn, Lone Star, Outdoorsman, Rebel, SLT, Special Service, Sport and Tradesman trims. The 2013 to 2017 Ram 3500 is listed in Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, SLT, ST and Tradesman trims.
No other Ram models are listed. Confirm your vehicle’s year, model and trim before ordering.








