Overview
The Trail Gear Rock Defense 303941-1-KIT is a front bumper for the Toyota Land Cruiser FJ80, supplied in bare steel. Trail-Gear builds it from 1020 DOM tubing (1.75″ X .120 wall) with a .25 CNC formed steel plate winch mount.
Trail-Gear says 1020 DOM is more dent resistant than HREW tubing and does not split along the seam. The winch plate is drilled for most 5000-9500 model low-profile winches and the smaller 9.0R Warn competition winches. Larger winches may need minor trimming of the grill, and a shackle receiver mount gives a recovery anchor point. The bumper is not rated for towing.
Key features
- 1020 DOM tubing, 1.75″ X .120 wall
- .25 CNC formed steel plate winch mount
- Winch plate drilled for 5000-9500 model low-profile winches and 9.0R Warn competition winches
- Shackle receiver mount for winch or strap recoveries
- Bare steel finish
- Built for the Land Cruiser FJ80
Painting and protection
Bare steel bumpers need a finish before they see trail use. Clean all welds and seams, remove mill scale and oil, then apply a rust-inhibiting primer followed by paint or powder coat. Pay attention to the inside of tubing and the winch plate edges, since moisture collects there and rust often starts in those spots.
Recovery gear should match the bumper’s mounts. Check that the shackle receiver and winch plate are tight after each season of use, and inspect welds for cracks after any hard impact. Use a winch and fairlead rated for your vehicle’s weight, and check the cable and hook regularly.
- Prime and seal welds soon after fitting
- Inspect the winch plate bolts after rough trails
- Keep the shackle receiver for recovery use only
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 303941-1-KIT |
| UPC | 700007890871 |
| Type | Rock Defense front bumper |
| Vehicle named | Land Cruiser FJ80 |
| Tubing | 1020 DOM, 1.75″ X .120 wall |
| Winch mount | .25 CNC formed steel plate |
| Finish | Bare steel |
| Winch plate | Drilled for 5000-9500 low-profile winches and 9.0R Warn competition winches |
| Towing | Not rated |
Vehicle fitment
This bumper is built for the Land Cruiser FJ80. Confirm your vehicle’s model year and trim before ordering.
It is built for the FJ80 only, so other Land Cruiser generations need a different bumper. Confirm your model year and trim before ordering.
Installation notes
Larger winches than the drilled patterns cover may need minor trimming of the grill. The bumper is bare steel and needs paint or powder coat for protection. Do not use the shackle receiver as a towing point, since the bumper is not rated for towing.
What’s included
- Front bumper with winch mount
- Shackle receiver mount
Not included: a winch and fairlead.














