Overview
The Trail Gear 140105-1-KIT is a replacement brass axle bushing for the front axle. It centers the front axle in the housing.
Trail Gear says these bushings are hard to find as replacements, which is why this kit is offered. The fit is labeled direct fit with no vehicle or year named.
Key features
- Brass construction
- Centers the front axle in the housing
Bushings and housing fit
An axle bushing sits in the housing and supports the axle shaft as it turns, keeping it centered so it does not rub or wander. Brass is a common bushing material that handles load and resists wear, and a sound bushing keeps the axle steady under the weight it carries. A worn bushing lets the axle move, which can cause knocking or uneven wear elsewhere.
Before fitting, clean the housing bore of rust, old sealant and grit. Measure the bore and compare it with the old bushing, then lubricate the bushing as it goes in so it does not gall. A bushing pressed in crooked can bind, so seat it evenly and check that it turns freely.
- Measure the housing bore before buying
- Clean the bore of rust and old sealant
- Lubricate the bushing as it is installed
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 140105-1-KIT |
| UPC | 70000621554 |
| Material | Brass |
| Function | Centers front axle in housing |
Vehicle fitment
No vehicles are named for this bushing. The direct fit label does not identify a vehicle, so compare the bushing with your front axle housing before choosing it.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
A replacement brass axle bushing is included. Count the bushings before starting the installation.









