Overview
The Trail Gear 110022-1-KIT is a wide rear greasable shackle kit. It fits the 1989–1995 Toyota Pickup, the 1993–1995 Toyota T100 and the 1995 Toyota Tacoma. The kit is made for Trail Gear springs only.
Trail Gear builds the kit with threaded zerk fittings, zinc-plated plates, 18mm factory size bolts with crimp nuts and Polly bushings. Lengths are measured from center of hole to center of hole, against the 3.5 inch spacing of stock shackles.
Key features
- Wide rear design
- Threaded zerk fittings for greasing
- Zinc-plated plates
- 18mm factory size bolts with crimp nuts
- Polly bushings included
- Made for Trail Gear springs only
Spring matching and fitment
Shackle kits work with the spring and hanger geometry they were designed around, so the spring brand and the hole-to-hole length both matter. Before ordering, measure the existing shackle spacing and check the spring markings. A spring from a different maker can have different eye sizes or pivot positions, which can make a shackle fit loosely or bind.
A wide rear kit also changes the stance and the clearance around the spring hangers. Check the tire clearance and the brake line routing once the kit is installed, and recheck the bolt torque after the first few drives. Keep the zerks clean and greased so the polly bushings can move freely under load.
- Measure existing shackle spacing before ordering
- Check spring markings and brand
- Confirm tire and brake line clearance
- Recheck bolt torque after the first drives
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 110022-1-KIT |
| UPC | 70000621528 |
| Width | Wide |
| Bolt size | 18mm, factory size |
| Plate finish | Zinc-plated |
| Spring compatibility | Trail Gear springs only |
| Stock reference | 3.5 inch between holes, center to center |
Vehicle fitment
The kit fits the following Toyota models:
- 1989–1995 Toyota Pickup (Base, DLX, SR5)
- 1993–1995 Toyota T100 (Base, DX, SR5)
- 1993, 1995 Toyota T100 One-Ton (DLX)
- 1995 Toyota Tacoma (Base, SR5)
The kit is made for Trail Gear springs only, so check your spring brand before fitting. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the kit is made for Trail Gear springs, confirm the spring brand before fitting. Compare the hole-to-hole length of your existing shackles with the 3.5 inch stock spacing noted for this kit, and grease the zerks after installation.
What’s included
The kit includes Polly bushings, zinc-plated plates, 18mm bolts with crimp nuts and threaded zerk fittings.






