Overview
The RE2785 is a front shackle conversion kit for CJ Jeeps. It lets 2-1/2-inch wide Wrangler-style springs mount on a CJ, and it is 1 inch longer than stock.
The shackles use 1/4-inch laser cut side plates, black polyurethane bushings, greaseable bolts and a silver plated finish. The front shackles include a cross bar for extra stability.
The listed fitment covers the CJ5 from 1972 to 1983, the CJ6 from 1972 to 1975 and the CJ7 from 1976 to 1986. The springs themselves are not part of this kit.
Key features
- Greaseable shackles with greaseable bolts
- 1/4-inch laser cut side plates
- Black polyurethane bushings
- Cross bar for extra stability
- Silver plated finish
- 1 inch longer than stock
Spring and shackle setup
Front shackles let the spring length change as the suspension flexes, so their bushings and bolts carry steady wear. A longer shackle changes the spring angle and can alter how the vehicle sits, so measure ride height on both sides before and after installation. Confirm the spring eyes, spring pins and hangers are in good condition, since worn spring hardware can cause new shackles to bind.
Greaseable bolts help keep the pivot moving freely, and polyurethane bushings resist wear better than many rubber parts. Grease the fittings on a regular schedule, especially after trail use and water crossings. If the spring width is changed, check clearance between the tire, fender and frame, and have the front axle realigned once the kit is installed.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE2785 |
| UPC | 614901440423 |
| Location | Front |
| Spring width conversion | 2.5 inches |
| Length | 1 inch longer than stock |
| Side plates | 1/4-inch laser cut |
| Bushings | Black polyurethane |
| Bolts | Greaseable |
| Finish | Silver plated |
| Cross bar | Included on front shackles |
Vehicle fitment
It fits the 1972-1983 CJ5, 1972-1975 CJ6 and 1976-1986 CJ7 Jeeps.
Earlier CJ models and Wrangler YJ vehicles are not on the list, even though the springs the kit accepts come from the Wrangler YJ. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit is 1 inch longer than stock, so check the ride height and the clearance at the spring after installation.
What’s included
A pair of front conversion shackles with the cross bar.
Not included: The 2.5-inch wide Wrangler-style springs, which the kit is made to accept but does not supply.



