Overview
The Warrior SR180-3 is a shackle reverse system with a 1 inch lift for the 1987–1995 Jeep Wrangler YJ. It moves the front leaf spring shackle to the rear of the same spring, changing the spring geometry to reduce wandering.
CJ-series Jeeps and YJ Wranglers can feel unstable and wander at speed, and the SR180-3 is designed to reduce that feel. It fits the YJ only.
Key features
- Front leaf spring shackle moved to the rear of the same spring
- Urethane bushings for the front leaf springs and frame brackets
- HRPO steel brackets, heat treated for increased strength
- Jig-welded for easier installation
- 1 inch lift
Welding and fabrication
Shackle reverse systems change how the front leaf spring is anchored, so the spring’s movement and the front axle position both shift. Plan the mounting carefully, and confirm the frame can take the new bracket loads before starting work.
Welding on a frame requires clean metal, proper prep, and correct technique. Grind away paint and rust at the weld points, and check that the spring hardware clears the new brackets. Recheck the bolts and welds after the first few drives, and inspect them again after rough trail use.
Urethane bushings wear differently from rubber, so check them during routine inspections for cracking and looseness at the mounts.
- Grind paint and rust from weld areas
- Check clearance between brackets and tires
- Inspect welds after the first drives
Specifications
| Brand | Warrior |
|---|---|
| Part number | SR180-3 |
| UPC | 63414618003 |
| Position | Front |
| Lift height | 1 inch |
| Bracket material | HRPO steel |
| Bushings | Urethane |
| Construction | Heat treated, jig-welded |
Vehicle fitment
It fits the following Jeep model:
- 1987–1995 Jeep Wrangler (YJ) (Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara, Sport)
Fitment is for the YJ only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Some welding is required on several applications, so plan for welding to the frame and spring hardware. Have a shop that can weld the brackets in place ready before installation.
What’s included
The kit comes complete with urethane bushings for the front leaf springs and frame brackets, plus the HRPO steel brackets.








