Overview
The Fabtech FTS2096 is a 2 inch rear lift shackle kit for the 1995–2004 Toyota Tacoma in Base and Pre Runner trims. It uses 3/8 inch steel plate shackles to raise the rear suspension of a mini or mid size truck.
It is designed to be a straightforward way to lift the rear suspension on this class of truck. The shackles are designed to install without major modification while providing the lift off-road drivers use.
Key features
- 2 inch rear lift
- 3/8 inch steel plate construction
- Designed for mini and mid size trucks
- Rear position
Before you buy
A rear shackle lift changes how the leaf springs hang and how the axle sits under the frame. Because the rear driveline angles change, the pinion angle and the drive shaft operating angles should be checked after installation. Worn bushings or cracked spring eyes are often replaced at the same time as the shackles.
Steel plate shackles are a common choice for this type of lift because they hold their shape under load. Compare the hole spacing of the new shackles with your existing ones, and confirm that the mounting points on the frame and axle match before tightening anything.
- Check driveline angles after the lift
- Inspect spring eyes and frame mounts for wear
- Confirm alignment after installation
- Replace worn bushings while the shackles are off
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS2096 |
| UPC | 674866011366 |
| Position | Rear |
| Lift height | 2 inch |
| Shackle material | Steel plate |
| Plate thickness | 3/8 inch |
Vehicle fitment
It fits the 1995–2004 Toyota Tacoma in Base and Pre Runner trims.
Other Toyota trucks, including Pickup and 4Runner models, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Shackle lifts change rear suspension geometry. After installing the kit, have the rear driveline angles checked and the alignment confirmed.
What’s included
Check the parts you receive against your installation before starting, since the included bushings, bolts and other hardware should be confirmed on arrival.






