Overview
The Trail Gear 110018-1-KIT is a greasable shackle reversal kit for Toyota pickups and 4Runners. It fits the 1984–1989 Toyota 4Runner and the 1979–1988 Toyota Pickup. A shackle reversal kit is used on a leaf spring suspension to change how the spring shackle is mounted, and this kit is a rear location with a front position.
Each kit is built around factory size 18mm bolts with crimp nuts, zinc plated plates and polly bushings, and the shackle pivots carry threaded zerk fittings so they can be greased. Lengths are measured from the center of one hole to the center of the other, with stock shackles at 3.5 inches between holes.
Key features
- Threaded zerk fittings for greasing the pivots
- Factory size 18mm bolts with crimp nuts
- Zinc plated plates
- Polly bushings included
- Stock shackles spaced 3.5 inches between holes
- Direct fit
Greasing and wear checks
Polly bushings and zerk-equipped pivots need regular greasing to stay quiet and to keep the shackle moving freely. Grease the zerks after installation and again at the interval you follow for the rest of the suspension. Dirt and water can work into dry pivots, so wiping the zerk before pumping grease helps keep contamination out.
When the old shackles are off, check the spring eyes, pivot pins and mounting holes for elongation or cracks. Worn holes can make a new kit feel loose even when the bolts are tight. Inspect the bolt threads and crimp nuts for signs of corrosion, and confirm the bolts are seated before the vehicle is driven on rough terrain.
- Grease zerks after installation and on schedule
- Wipe zerks clean before pumping grease
- Check spring eyes and pivot holes for wear
- Inspect crimp nuts and bolt threads for corrosion
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 110018-1-KIT |
| UPC | 70000621532 |
| Bolts | Factory size 18mm with crimp nuts |
| Plates | Zinc plated |
| Bushings | Polly bushings included |
| Lube fittings | Threaded zerk |
| Stock shackle spacing | 3.5 inches between holes, center to center |
| Location | Rear |
| Position | Front |
| Fitment type | Direct Fit |
Vehicle fitment
The kit fits the 1984–1989 Toyota 4Runner (DLX, SR5) and the 1979–1988 Toyota Pickup (Base, Base Turbo, DLX, DLX Turbo, SR5, SR5 Turbo).
Toyota model years outside those ranges, and other Toyota models not on the list, are not covered by this fitment. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit includes polly bushings, factory size 18mm bolts with crimp nuts, zinc plated plates and threaded zerk fittings.
Not included: Check whether leaf springs, frame brackets or other mounting parts are needed before starting, since they are not included in this kit.







