Select your vehicle

Trail Gear Frame Tubes Kit – 110025-1-KIT

Trail Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Trail Gear 110025-1-KIT frame tubes kit for mounting leaf springs in an IFS style frame
  • Fits 1984–1995 Toyota 4Runner (DLX, SR5) and 1979–1995 Toyota Pickup models
  • Accepts stock Toyota front bushings; jigs position the tubes in the frame
  • Sold as a pair; photo tubes are for example only

Description

Overview

The Trail Gear 110025-1-KIT is a frame tubes kit for IFS style frames, used to mount leaf springs. It fits the 1984–1995 Toyota 4Runner and the 1979–1995 Toyota Pickup, and the tubes accept stock Toyota front bushings.

Jigs position the tubes inside the frame. It is a front-position misc. mounting tab with a direct fit, and its tube diameter is Any.

Key features

  • Tubes install into an IFS style frame to mount leaf springs
  • Accepts stock Toyota front bushings
  • Jigs are used to position the tubes in the frame
  • Tube diameter is Any
  • Front position, direct fit, sold as a pair

Frame tube installation

Frame tubes are the structural link between the leaf spring and the frame on an IFS style chassis, so their position controls axle location and spring angle. Setting jigs first lets the tubes sit square and level before anything is secured. Small errors in tube angle can cause uneven spring loads, so take time to measure from fixed reference points on the frame.

Bushings that press into the tubes wear and should be checked whenever the kit is installed or serviced. Look for cracking, play or uneven wear. The leaf springs, shackles and mounting hardware carry the same loads, so inspect them together. After the first drives, re-check the tube welds and the bushing fit for movement.

  • Measure tube angle from fixed frame points
  • Bushing play and cracking
  • Re-check welds after the first drives

Specifications

Brand Trail Gear
Part number 110025-1-KIT
UPC 70000621222
Type Misc. mounting tab
Position Front
Fitment type Direct fit
Sold as Pair
Tube diameter Any
Bushings accepted Stock Toyota front bushings

Vehicle fitment

Trail Gear’s manufacturer fitment list covers the 1984–1995 Toyota 4Runner (DLX, SR5) and the 1979–1995 Toyota Pickup (Base, Base Turbo, DLX, DLX Turbo, SR5, SR5 Turbo).

Toyota models and generations not named in that list are not covered, including 4Runners and Pickups from other years. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Set the jigs first, check tube position against the frame, and only then secure the tubes. Because the tubes carry suspension loads, have a qualified shop verify the fit before the vehicle is driven.

What’s included

The kit is sold as a pair.

Not included: Leaf springs, the frame and stock Toyota front bushings. The tubes pictured are for example only.

SKU: TGI110025-1-KIT Category:

Specification

Shipping weight 0.65 lbs
Package dimensions 7.50 × 7.50 × 3.50 in
brands

Fitment

VehicleYearsTrims
Toyota 4Runner1984–1995DLX, SR5
Toyota Pickup1979–1995Base, Base Turbo, DLX, DLX Turbo, SR5, SR5 Turbo

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Which vehicles does the Trail Gear 110025-1-KIT fit?

The manufacturer fitment list names the 1984–1995 Toyota 4Runner (DLX, SR5) and the 1979–1995 Toyota Pickup in its Base, Base Turbo, DLX, DLX Turbo, SR5 and SR5 Turbo trims. Confirm your vehicle's year, model and trim before ordering.

What is part number 110025-1-KIT?

It is a Trail Gear frame tubes kit, UPC 70000621222, used to mount leaf springs in an IFS style frame. The kit accepts stock Toyota front bushings and is sold as a pair.

Are the tubes shown in the photos included?

No. The tubes pictured are for example only. Leaf springs, the frame and stock Toyota front bushings are not part of the kit.

Do the jigs come with the kit?

Yes, jigs are used to position the tubes in the frame during installation. Compare the kit contents with your installation before starting work.

Do frame tubes need checks after installation?

Yes. Confirm alignment and welds before the vehicle is driven, since the tubes carry suspension loads. Afterwards, check the bushings and mounting hardware regularly for play, cracking or loosening, especially after rough off road use.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon