Select your vehicle

Trail Gear Frame Tubes Kit – 110026-1-KIT

Trail Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Trail Gear 110026-1-KIT frame tubes kit for mounting leaf springs in IFS style frames
  • Fits 1984–1995 Toyota 4Runner (DLX, SR5) and 1979–1995 Toyota Pickup models
  • Tubes accept stock Toyota front bushings; jigs position them in the frame
  • Sold as a pair, direct fit, front position

Description

Overview

The Trail Gear 110026-1-KIT is a pair of frame tubes for IFS style frames, used to mount leaf springs. It fits the 1984–1995 Toyota 4Runner and the 1979–1995 Toyota Pickup, and the tubes take stock Toyota front bushings.

Jigs set the tube position in the frame during fitting. The fitment type is direct, and the tube diameter is Any.

Key features

  • Mounts leaf springs on an IFS style frame
  • Stock Toyota front bushings are accepted
  • Jig-assisted positioning of the tubes in the frame
  • Tube diameter is Any
  • Front-position misc. mounting tab, sold as a pair

Setting up IFS frame tubes

On IFS style frames, the tubes take over the mounting role that the stock front suspension once filled, so their placement must match the leaf spring layout. The jigs are a reference for that placement, and they work best when the frame is clean and the cab mounts are solid. Mark reference points before cutting or welding anything.

Stock front bushings pressed into the tubes are a wear item. Replace them when they show cracking, play or squeaking, since worn bushings let the spring shift under load. Re-check the tubes after the first few drives, and keep an eye on the frame around the tube welds for hairline cracks that may develop under repeated flex.

  • Clean frame and solid cab mounts before setup
  • Reference marks taken before cutting or welding
  • Bushing wear checked at each service

Specifications

Brand Trail Gear
Part number 110026-1-KIT
UPC 70000621218
Type Misc. mounting tab
Position Front
Fitment type Direct fit
Sold as Pair
Tube diameter Any
Bushings accepted Stock Toyota front bushings

Vehicle fitment

The manufacturer fitment list for this kit names the 1984–1995 Toyota 4Runner (DLX, SR5) and the 1979–1995 Toyota Pickup (Base, Base Turbo, DLX, DLX Turbo, SR5, SR5 Turbo).

Only the 4Runner and Pickup entries above are covered. Other Toyota models, and other years of these two models, are not on the list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Set the jigs before securing the tubes and check placement against the frame at each step. A qualified shop should confirm the fit before the vehicle is returned to regular use.

What’s included

The item is sold as a pair.

Not included: Leaf springs and the frame are not part of this kit. Stock Toyota front bushings are needed for the tubes but are not supplied.

SKU: TGI110026-1-KIT Category:

Specification

Shipping weight 3.00 lbs
Package dimensions 7.50 × 7.50 × 3.50 in
brands

Fitment

VehicleYearsTrims
Toyota 4Runner1984–1995DLX, SR5
Toyota Pickup1979–1995Base, Base Turbo, DLX, DLX Turbo, SR5, SR5 Turbo

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Which vehicles fit the Trail Gear 110026-1-KIT?

The manufacturer fitment list names the 1984–1995 Toyota 4Runner in DLX and SR5 trims, and the 1979–1995 Toyota Pickup in several trims including Base, DLX and SR5. Confirm your vehicle's year, model and trim before ordering.

What does part number 110026-1-KIT contain?

It is a Trail Gear frame tubes kit, UPC 70000621218, sold as a pair. The tubes install into an IFS style frame and accept stock Toyota front bushings for leaf spring mounting.

Do I need separate bushings?

Yes, plan to supply the stock Toyota front bushings yourself. They are needed for the tubes but are not included, along with the leaf springs and the frame.

Are jigs used during installation?

Yes. Jigs are used to position the tubes in the frame during installation. Check the package contents against your installation before starting.

How can I tell if the tubes need attention?

Look for movement of the tubes in the frame, cracks around the welds, or uneven spring height side to side. Any play at the tube or a shifted spring should prompt a re-check by a qualified shop before the vehicle is used hard.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon