Overview
The Trail Gear 110226-1-KIT is a 4-inch HD IFS eliminator kit that converts the front to a solid axle setup. It fits 1986–1995 Toyota 4Runner (DLX, SR5) and Toyota Pickup models.
The kit removes the factory independent front suspension and replaces it with leaf springs and a live or solid axle. It includes HD front leaf springs, a Hi-Steer kit, brake lines, brake rotors and a steering stabilizer kit, and it is listed with a lift height range of 3 to 4.99 inches.
Key features
- 4-inch lift
- HD front leaf springs
- Hi-Steer kit and drop hanger
- Greasable shackles
- Steering stabilizer kit
- Shock hoops and front shocks
- Brake lines and brake rotors
- Wheel spacers and bump stops
- Diff armor plate
Before the conversion
Converting a Toyota from independent front suspension to a solid axle changes more than ride height. The steering, brakes, driveline and front alignment all work differently once the factory front suspension is removed, so plan the job as a full front-end rebuild rather than a simple lift. Ask the installer to inspect the transfer case, front driveshaft and steering components before the conversion starts, since parts that were fine on the stock setup can be stressed by the new geometry.
Components often replaced alongside a conversion include the driveshaft, the steering linkage and the front wheel bearings. Check each one for play and wear while the front is apart. After the first few trail runs, re-check the bolts on the leaf springs, shock hoops and steering stabilizer, since new suspension parts tend to settle.
- Inspect the transfer case and driveline angles
- Check steering linkage for play
- Re-torque leaf spring and shock hardware after the first trail runs
- Confirm brake line routing before driving
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 110226-1-KIT |
| UPC | 70000621375 |
| Lift | 4 inch |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Leaf spring |
| Rear lift method | None |
| Position | Front |
| Shocks included | Yes |
Vehicle fitment
The manufacturer fitment list covers 1986–1995 Toyota 4Runner (DLX, SR5) and 1986–1995 Toyota Pickup (Base, Base Turbo, DLX, SR5, SR5 Turbo).
Tacoma model years fall outside this fit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The conversion replaces the factory front suspension, so have a shop that does solid axle conversions install it and check the alignment afterward.
What’s included
HD front leaf springs, Hi-Steer kit, drop hanger, greasable shackles, steering stabilizer kit, shock hoops, front shocks, brake lines, brake rotors, wheel spacers, bump stops and diff armor plate.
Not included: a matching rear lift, a donor solid front axle and a long spline drive shaft.









