Overview
The Trail Gear 130291-1-KIT is a steering tie rod kit built from .250in. wall DOM 1.25in. tubing, for 1984–1995 Toyota 4Runner and 1979–1995 Toyota pickup models. The kit includes 2 tie rod tubing pieces with threaded rod ends.
Each rod is test fitted so the rod ends thread in with the correct fit. The tubing carries a left side thread mark, and the kit has a powder coated black finish.
Key features
- Tubing made from .250in. wall DOM 1.25in. tubing
- Each rod is test fitted so the rod ends thread in with correct fit
- Left side thread mark on the tubing
- Powder coated black finish
- 4 chromoly threaded rod ends and 4 threaded jam nuts included
Steering layout and rod ends
Threaded rod ends let a steering link be built to length, and the jam nuts lock each end in place once the length is set. Because thread engagement determines how much load each end can carry, both ends should be seated fully and the nuts tightened before the assembly goes on the vehicle. Keep threads clean and lightly coated so the adjustment can be repeated.
On a steering layout rebuilt with aftermarket tubing, check the rod ends for movement after the first trail outings and re-check the jam nuts. Look at the tubing for straightness and at the coating near the ends for chips that may trap moisture. Set alignment after assembly, since changing tube length moves toe, and a loose link shows quickly as steering wander.
- Seat both rod ends fully before tightening
- Re-check jam nuts after trail use
- Inspect tubing coating for chips
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 130291-1-KIT |
| UPC | 70000621255 |
| Tubing | .250in. wall DOM 1.25in. tubing |
| Tie rod tubing included | 2 |
| Rod ends | 4 chromoly threaded |
| Jam nuts | 4 threaded |
| Finish | Powder coated black |
| Hydro type | Full Hydro |
Vehicle fitment
It fits the 1984–1995 Toyota 4Runner in DLX and SR5 trims and the 1979–1995 Toyota Pickup in Base, Base Turbo, DLX, DLX Turbo, SR5 and SR5 Turbo trims.
Not covered: Toyota models other than the 4Runner and pickup named here. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The left side thread mark shows which end threads left-hand, so confirm orientation before tightening the jam nuts. Set steering alignment after assembly.
What’s included
2 tie rod tubing, 4 chromoly threaded rod ends and 4 threaded jam nuts.












