Overview
The Trail Gear 110039-1-KIT is a 3-inch front lift kit with 47-inch leaf springs, for the 1979–1985 Toyota Pickup and the 1984–1985 Toyota 4Runner. It is a front-only lift, with a listed lift range of 3 to 4.99 inches.
The long leaf springs, long-travel shocks and high steer crossover steering are designed to give up to 20 inches of articulation for rock crawling. Each kit includes a knuckle rebuild kit, wheel bearing kits, an upper axle gusset and differential armor.
Key features
- 47-inch front leaf springs
- Long-travel shocks, two Bilstein shocks included
- High steer crossover steering
- Up to 20 inches of articulation, per the manufacturer
- Greasable shackles and U-bolt flip kit
- Knuckle rebuild kit, wheel bearing kits, upper axle gusset and differential armor included
Installation planning for a front conversion
A front suspension lift with long leaf springs changes far more than ride height. Spring length, shock angle and steering linkage all change together, so the work is best planned as a full conversion instead of a simple swap. Pay attention to the axle and the driveline, since a front lift this size shifts the pinion angle and can add vibration if the driveshaft is left unchanged.
Older parts are often worth inspecting while the axle is apart. Ball joints, tie rod ends, wheel bearings and brake hoses that have seen many years of use are good candidates for a check. Leaf spring bushings and shackles also wear, and greasable shackles need regular lubrication. Keeping a service log helps track when each part was last checked.
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 110039-1-KIT |
| UPC | 70000621476 |
| Lift height range | 3 to 4.99 inches |
| Lift location | Front (no rear lift) |
| Suspension type | Leaf spring |
| Leaf spring length | 47 inches |
| Shocks included | Yes, 2 Bilstein shocks |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1984–1985 Toyota 4Runner (DLX and SR5) and the 1979–1985 Toyota Pickup (Base, DLX, DLX Turbo, SR5 and SR5 Turbo).
Confirm fit for your vehicle’s year, model and trim before ordering, since 4Runner and Pickup model years outside 1979–1985 are not covered.
Installation notes
This is a front suspension and steering conversion, so professional installation is advised. Have the alignment and driveline angles checked after installation, since a lift this size changes both.
What’s included
The kit includes front spring hanger with bolts and bushings, front leaf springs with bushings, greasable shackles, two Bilstein shocks, two shock hoops with gussets, a U-bolt flip kit, two extended front brake lines, high steer crossover steering, a knuckle rebuild kit, wheel bearing kits, an upper axle gusset and differential armor.









