Overview
The PLT09116 is a 2.5-inch poly lift strut spacer kit for the front of 2003-2009 Toyota 4Runner, 2007-2014 Toyota FJ Cruiser and 2005-2015 Toyota Tacoma models. It is a front-only lift built around a polyurethane spacer that sits in the strut assembly, from Pro Comp Suspension.
The spacer is a computer-designed coil spacer molded from polyurethane. It aims for a firm but supple ride without sacrificing articulation on and off the road. The kit reuses the stock coil springs and includes all necessary hardware.
Pro Comp recommends replacing the existing shock absorbers with performance series shocks to maximize performance and ride quality with this kit.
Key features
- Polyurethane coil spacer molded for a firm but supple ride
- Reuses the stock coil springs
- All necessary hardware included
- Front lift only, using strut spacers
- Black finish
Living with a front spacer lift
Front spacers on these Toyota trucks and SUVs keep the stock coil springs in service while raising the front. That approach suits owners who want more ground clearance and a little more front height without a full suspension swap. Because the springs stay put, the lift depends on the spacer seating squarely on the strut.
Off-road use puts more load on the front end, so the spacer and its hardware should be checked regularly. Articulation can change once the front is raised, which is worth noticing on steep ledges and off-camber sections. Plan for tire clearance at full lock and expect the front to feel slightly different on the highway.
- Check spacer seating after rough trail runs
- Inspect the shock mounts for wear
- Confirm tire clearance at full steering lock
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | PLT09116 |
| UPC | 614901127461 |
| Lift height | 2.5 inch |
| Lift method | Front strut spacers, front lift only |
| Spacer material | Polyurethane |
| Finish | Black |
| Included | All necessary hardware; stock coil springs are reused |
Vehicle fitment
It fits the 2003-2009 Toyota 4Runner, the 2007-2014 Toyota FJ Cruiser and the 2005-2015 Toyota Tacoma.
It does not fit the 1996-2002 4Runner or the 2000-2006 Tundra, which are covered by the separate PLT09103 kit. Verify your year, model and trim before ordering.
Installation notes
Since the kit reuses the stock coil springs, the lift depends on the spacer and the spring seat working together. Pro Comp advises performance shocks, and a front-only lift should be followed by an alignment check.
What’s included
The spacer kit with all necessary hardware. The stock coil springs are reused, so no springs are included.









