Overview
The Rubicon Express TJ/LJ 3.5 inch Super-Flex adjustable upper and fixed lower system with mono tube shocks is a suspension system for TJ and LJ Wranglers that run factory short arm geometry. It is designed to combine flexibility and handling.
The system includes eight new control arms with adjustable upper arms at the front and rear, using serviceable Super-Flex spherical ball joints. It also includes an adjustable front track bar, replacement 3.5-inch lift springs, extended bump stops, longer front stainless steel brake lines and Gen II sway bar disconnects. The shocks in this version are mono tube.
Key features
- Eight new control arms
- Adjustable upper front and rear arms
- Super-Flex spherical ball joints
- Adjustable front track bar
- Replacement 3.5-inch lift springs
- Extended bump stops
- Gen II sway bar disconnects
Mono tube shock considerations
Mono tube shocks use a single pressure tube with a separate gas chamber, which can help the damping stay consistent when the shock heats up. That makes them a common choice for drivers who spend time on rough trails. The shock length should be checked against the new springs and arms before installation.
After installing, check the shock mounts and eyes for play and watch for oil on the shaft. A shock that has lost damping can make the vehicle feel loose after bumps. Replacing shocks in pairs on each axle keeps the ride even from side to side.
- Check shock mounts for play after the first drives
- Look for oil seepage along the shaft
- Replace shocks in pairs on each axle
Specifications
| Brand | Rubicon Express |
|---|---|
| UPC | 614901148282 |
| Lift height | 3.5 inches |
| Shock design | Mono tube |
| Control arms | Eight new, adjustable upper front and rear |
| Vehicles | TJ and LJ with factory short arm geometry |
Vehicle fitment
It fits TJ and LJ Jeep Wranglers with factory short arm geometry. The TJ covers 1997 to 2006 and the LJ covers 2004 to 2006.
It does not cover other Wrangler generations. Verify your year, model and trim before buying.
Installation notes
The system replaces most of the front and rear suspension, so it is a full install rather than a bolt-on add-on. Check the brake line and sway bar disconnect fit before starting, and set alignment after the lift is complete.
What’s included
Eight control arms, an adjustable front track bar, 3.5-inch lift springs, extended bump stops, longer front stainless steel brake lines and Gen II sway bar disconnects.

















