Overview
The Rancho tie rod end is a replacement steering tie rod end for the 2007 to 2014 Chevrolet Tahoe. It is a replacement end for lift applications, so it suits Tahoes with a suspension lift.
Key features
- Replacement tie rod end for lift applications
- Non-greasable construction
- A replacement part for a suspension kit.
- It is made for the 2007 to 2014 Chevy Tahoe.
Before you buy
A tie rod end connects the steering rack or center link to the steering knuckle, so it carries steering input to the wheels. On a lifted Tahoe, the geometry changes and the linkage works through a different angle, which is why replacement ends are often sized for lift applications. Wear shows up as play in the steering, a clunk over bumps, or uneven tire wear along one edge.
Because the joint is non-greasable, there is no fitting to service it. Inspect the boot and check for movement by hand with the vehicle safely supported. When a tie rod end is replaced, the toe setting changes, so an alignment afterward keeps the tires wearing evenly and the steering centered.
- Check the other linkage ends at the same time
- Inspect the drag link and steering stabilizer for play
- Confirm the thread and taper match your original part
Specifications
| Brand | Rancho |
|---|---|
| Part type | Tie rod end |
| UPC | 70000436662 |
| Greasable | No, non-greasable |
| Fit | 2007 to 2014 Chevy Tahoe |
Vehicle fitment
Based on the stated fitment, this Rancho tie rod end is for the 2007 to 2014 Chevrolet Tahoe. No trim is specified.
Other Tahoe generations and model years outside 2007 to 2014 are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Steering linkage work such as replacing a tie rod end usually calls for a wheel alignment afterward.
What’s included
Confirm the hardware you need for your installation before starting.









