Overview
The TeraFlex Model 300 transfer case low range kit, part number 2123000, is a low-range gearset for Dana 300 transfer cases. It brings the low range ratio to 4.0:1 and fits 1981–1983 Jeep CJ5 and 1981–1986 Jeep CJ7 models.
Off-road, a slower gear means the engine does the work instead of the throttle pedal. Less throttle is needed to get up a steep, rough climb, which is why low gearing is so widely used by four-wheelers. Without enough low gearing, a driver may depend on heavy throttle, and that can break parts as the vehicle lunges over an obstacle.
Other ways to get lower gearing include changing ring and pinion ratios or swapping the transmission or transfer case. Lower differential gears reduce highway comfort, since engine speed rises and wear and fuel economy suffer. Full swaps are costly and need many modifications, which makes a transfer case gearset a more contained change.
Key features
- Low range ratio of 4.0:1
- Built for Dana 300 transfer cases
- Includes bearings and gaskets
- Lower gearing for slow, controlled climbing over obstacles
- Listed fitment for 1981–1983 Jeep CJ5 and 1981–1986 Jeep CJ7
Gear ratio and engine load
Low range lets the engine do the work on steep or rough ground, so the throttle stays light and the drivetrain sees steadier torque. That steadier load is the main benefit of a gearset like this one. Without it, drivers often rely on heavy throttle, which puts shock through the transmission and axles.
Before choosing a kit, confirm the transfer case model, the mounting pattern and the shift linkage. A Dana 300 gearset will not work in another case, and linkage that is out of adjustment can make the range hard to select. Break-in matters too, so avoid hard loading for the first stretch of driving.
Keep an eye on the transfer case seals and fluid level in the weeks after installation. A small seep is worth investigating before it becomes a larger leak.
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 2123000 |
| UPC | 843885027591 |
| Transfer case model | Dana 300 |
| Low gear ratio | 4.00:1 |
| Included | Bearings and gaskets |
| Fitment label | Direct fit |
Vehicle fitment
Listed fitment covers the 1981–1983 Jeep CJ5 with Base, Laredo, Limited and Renegade trims, and the 1981–1986 Jeep CJ7 with Base, Laredo, Limited and Renegade trims.
Years outside these ranges, such as the 1976–1979 CJ7, are not in this list, and Wrangler, Cherokee and Scrambler models are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because this is a gearset rather than a simple bolt-on part, have it installed and set up by a professional. Gear sets generally need a proper setup and a break-in period, and the transfer case model should be confirmed as Dana 300 before work begins.
What’s included
Bearings and gaskets come with the kit. Check any other installation parts your setup needs before starting work.












