Overview
The TeraFlex Model 20 transfer case low range kit, part number 2112020, is a low-range gearset for Dana 20 transfer cases. It sets a low range ratio of 3.15:1 and fits 1972–1979 Jeep CJ5 and 1976–1979 Jeep CJ7 models.
Lower gearing lets a vehicle travel more slowly at a given engine speed, which is how off-road drivers crawl over obstacles. With low gears the vehicle can climb without relying on heavy throttle, since a hard push on the gas pedal can carry a vehicle over an obstacle while also breaking parts in the process.
Before kits like this one, low gearing usually meant changing ring and pinion ratios or swapping the transmission or transfer case. Low ring and pinion gears work well off-road, but highway driving suffers because engine speed rises, which can increase engine wear and reduce fuel economy. Full transmission and transfer case swaps can be very expensive and need many modifications, so a low range kit that works inside the transfer case is a different route to lower gearing.
Key features
- Low range ratio of 3.15:1
- Built for Dana 20 transfer cases
- Includes bearings and gaskets
- Lower gearing for slow, controlled climbing over obstacles
- Listed fitment for 1972–1979 Jeep CJ5 and 1976–1979 Jeep CJ7
Low range and tire size
A low range gearset changes how much the engine turns for each wheel turn, which is why tire size matters. Larger tires already reduce effective gearing, so a low range set up on larger tires will feel slower than the same kit on stock tires. Consider the full drivetrain when planning the setup.
Low range is for slow, controlled travel off-road. Avoid using it at highway speeds, and shift back to high range once the obstacle is behind you. Fresh transfer case fluid and a check of the shift linkage after installation help the new gears operate smoothly.
Many owners also review the front and rear axle gears, the transmission and the driveshaft angles when a low range is added, because each part affects how the drivetrain works under load.
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 2112020 |
| UPC | 843885027577 |
| Transfer case model | Dana 20 |
| Low gear ratio | 3.15:1 |
| Included | Bearings and gaskets |
| Fitment label | Direct fit |
Vehicle fitment
Listed fitment covers the 1972–1979 Jeep CJ5 with Base, Golden Eagle and Renegade trims, and the 1976–1979 Jeep CJ7 with Base, Golden Eagle and Renegade trims.
This list does not include 1980 and later CJ models or any Wrangler, Cherokee or other Jeep models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A low range gearset changes how the transfer case drives the wheels, so have it installed and set up by a professional. Gear sets like this usually need a proper setup and a break-in period before regular driving. Confirm that your transfer case is a Dana 20 before starting any work.
What’s included
The kit includes bearings and gaskets. Check the other parts your setup needs before starting work.












