Overview
The 2Low kit is an internal transfer case modification for the 241-OR transfer case in the Rubicon JK Wrangler. It increases trail turning ability by allowing tighter turns on narrow switchbacks, and it reduces most front-end steering bind associated with four-wheel drive.
The modification is completely internal and needs no changes to the transfer case housing or components. Installation can be done with the front half of the transfer case still in the vehicle. The 2Low keeps the factory low-range options, including ESP disabling, the electronic sway bar disconnect and locker engagement and disengagement. In the 2Low position, the 4WD dash light illuminates to show a low range gear.
This kit is for the 2-door Rubicon JK Wrangler with a 241-OR transfer case.
Key features
- Internal modification with no housing or component changes
- Increases trail turning ability on narrow switchbacks
- Reduces most front-end steering bind associated with 4WD
- Keeps factory low-range options: ESP disabling, electronic sway bar disconnect, and locker engage and disengage
- Installation possible with the front half of the transfer case in the vehicle
- 4WD dash light illuminates in the 2Low position
Driving in low range
Low range gearing helps most on steep climbs, technical descents and slow trail sections where control matters more than speed. The 2Low change keeps those gears available while adding tighter turning on narrow switchbacks. Use the lower range deliberately, and shift back to a high range before picking up speed on open trail or pavement.
Because the work is internal, transfer case care centers on fluid and shift function. Check the transfer case fluid at service intervals, and watch for hard shifting, grinding or a dash light that does not change as expected. A worn shift fork or linkage can make the low range hard to engage, so have it inspected rather than forcing the lever.
- Shift into low range at low speed, following the vehicle’s shift guidance
- Confirm the 4WD dash light shows the selected range
- Check the locker controls after any shift problem
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 2266900 |
| UPC | 843885027638 |
| Product type | 2Low kit |
| Transfer case | 241-OR |
| Body style | 2-door models |
| Shift pattern | 2H, 4H, N, 2L, 4L |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2007 to 2015 Jeep Wrangler JK models, limited to the Rubicon with a 241-OR transfer case.
Other JK transfer cases, 4-door Wranglers outside the stated application, and the Wrangler JL are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit works through the internal shift components of the 241-OR transfer case. The front half of the case can stay in the vehicle during installation, and the shift pattern becomes 2H, 4H, N, 2L, 4L.
What’s included
The kit is the internal 2Low parts for the 241-OR transfer case only. Check the package contents against your installation, including the tools needed, before starting.









