Overview
The TeraFlex 4990800 is an axle gusset for the front upper knuckle, sold as a pair. A gusset is a reinforcing plate that braces a joint, and this one is made for the knuckle area of a front axle. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Front upper knuckle axle gusset
- Sold as a pair
- Described by TeraFlex as a direct fit
- Catalogued under fabrication gussets and tabs
Choosing and fitting gussets
A gusset adds material to a joint so loads are spread over a wider area rather than concentrated on a single weld or bolt. On an axle, the knuckle area carries steering and braking loads, so gussets there are usually considered when a build sees hard use. They are generally fitted by welding, which means the metal and weld quality matter as much as the part itself.
Before fitting, clean the mounting surfaces to bare metal and check that the gusset sits flat against the knuckle. Compare the holes or weld lines with your existing axle so the plate does not force the joint out of alignment. Re-inspect welds and mounting points after the first trail runs.
- Check the plate for cracks or distortion before fitting
- Confirm weld quality and penetration on the knuckle
- Recheck bolt torque after the first few trail runs
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 4990800 |
| UPC | 843885003441 |
| Application | Front upper knuckle |
| Quantity | Pair |
Vehicle fitment
No vehicle year, model or chassis code is named for this gusset. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One pair of axle gussets for the front upper knuckle.














