Overview
The TeraFlex 1954105 is a 1/2-inch front leveling spacer for the 2007–2015 Jeep Wrangler JK. It levels a JK that sits low in the front from the weight of a winch, sagging springs or a loaded vehicle. The spacer works in a stock configuration or on a lifted vehicle.
TeraFlex sells the spacers individually and offers them in 1/2, 1 and 2.5 inch increments. This one is the 1/2-inch version. The spacer is made of polyurethane.
The 1/2-inch spacer is the smallest increment TeraFlex offers for this JK. It suits a Wrangler that sits a little low in front, while the 1-inch and 2.5-inch versions cover larger corrections.
The spacers in this series are sold individually. TeraFlex designs them for stock or lifted JK setups, so the same spacer suits either configuration.
Key features
- 1/2-inch front lift
- Polyurethane coil spring spacer
- Works with stock or lifted JK setups
- Covers 2-door and 4-door JK Wranglers and all JK Rubicon models
- Black finish
Front height and spacer choice
A front coil spring spacer raises the front of the vehicle by adding a small amount of height at the spring seat. Stock or lifted JK setups can both benefit, but the amount of front drop should be measured before buying. Measure from the wheel center to the fender at each corner and compare the two sides.
Coil spring spacers change how the spring sits and how the front suspension works, so inspect the coil springs and the spring perches for wear or damage before installing one. A front alignment check after the height change helps the tires wear evenly. Keep the spacers clean and dry, since polyurethane can crack under exposure to certain fluids.
- Measure front drop at both corners
- Inspect coil springs and perches before install
- Check the front alignment after the change
- Avoid stacking spacers to correct a large drop
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1954105 |
| UPC | 843885024910 |
| Lift height | 1/2 inch |
| Lift location | Front only (no rear lift) |
| Front lift method | Coil spring spacers |
| Spacer material | Polyurethane |
| Finish color | Black |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2007–2015 Jeep Wrangler (JK), including the 2-door and 4-door models.
Wrangler model years 2006 and earlier and 2018 and later fall outside the years this spacer covers. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The spacer is installed on the front coil spring, so the front alignment should be checked after the height change.
What’s included
The spacer is sold individually. No other hardware is listed with it.














