Overview
The TeraFlex 1155110 is a 1/2-inch front spacer load leveling kit for the 2018–2021 Jeep Wrangler JL, in both 2-door and 4-door bodies, and for the 2020–2021 Jeep Gladiator in its Overland, Rubicon, Sport and Sport S trims. It adds front height to help level the vehicle when it carries heavier aftermarket gear such as bumpers, a winch, a larger spare tire or weekend swag.
The spacers are polyurethane and come with the necessary hardware. The kit works with original or stock-length aftermarket shock absorbers. Falcon shock absorbers are the suggested pairing.
Key features
- 1/2 inch front spacers
- All necessary hardware included
- Works with original or stock-length aftermarket shocks
- Falcon shock absorbers recommended by TeraFlex
- Usable at the front, rear or all four corners
Shocks with front spacers
Front spacers raise the height without changing the shock length, so stock-length shocks remain in use. Stock-length shocks keep the factory damping and travel characteristics, which is why the ride stays close to the original. Extended shocks are a separate choice that some owners add for more travel.
If you choose a different shock later, check its length, mounting and spring pad height before buying. Shocks that are worn or tired may not control the front end as well, so inspect them along with the spacers. Keep the shock mounts and bushings in good condition, since they are part of the same system.
- Inspect shock mounts and bushings for wear
- Check the upper shock bolts for tightness after the first drive
- Watch for leaking shock oil on the body
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | TER1155110 |
| Front lift height | 1/2 inch |
| Lift method | Coil spring spacers |
| Spacer material | Polyurethane |
| Finish | Black |
| Bump stops | None |
Vehicle fitment
It fits the 2020–2021 Jeep Gladiator in the Overland, Rubicon, Sport and Sport S trims, and the 2018–2021 Jeep Wrangler JL in its 2-door and 4-door Rubicon, Sport and Sport S trims, and its Unlimited Rubicon, Sahara and Sport trims.
It fits the Wrangler JL and the 2020–2021 Gladiator only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes the spacers and all necessary hardware, so the installation is a spacer fit at the front. Because it works with stock-length shocks, no extended shocks are needed for the added height. TeraFlex recommends its Falcon shocks, which are a separate purchase.








