Overview
The Ten Factory MG21104 is a front axle tube seal for Dana 30 and Dana 44 front axle tubes, helping keep mud and debris out. Part number MIDMG21104 fits the Dana 30 TJ, Dana 30 Reverse and Dana 44 axle types.
This is an updated design of the earlier tube seal. It is not compatible with a passenger side vacuum disconnect two piece axle shaft, so check that setup first.
Key features
- Keeps mud and debris out of front axle tubes
- Updated design.
- Available in black, red and silver
- Fits the Dana 30 TJ, Dana 30 Reverse and Dana 44 axle types
Keeping front axle tubes clean
Front axle tubes are open to road spray, mud and grit, and debris can work past the seal and reach the bearings and gears. A tube seal reduces that exposure, so keeping it intact helps the axle components last longer. Because the seal sits at the tube end, it is often inspected when the front hub or axle shaft is serviced.
If your front axle uses a passenger side vacuum disconnect with a two piece shaft, confirm the setup before choosing this seal, since the seal does not work with that arrangement. Look at the seal lip for cracks, flattening or tears, and check the seal area for fluid leaks after the first drives. Replace a damaged seal promptly, and clean the tube end before fitting the new one.
- Inspect the seal lip for cracks or tears
- Clean the tube end before fitting
Specifications
| Brand | Ten Factory |
|---|---|
| Part number | MIDMG21104 |
| Axle location | Front |
| Axle types | Dana 30 TJ, Dana 30 Reverse, Dana 44 |
| Color | Silver (black and red also offered) |
| Compatibility | Not for passenger side vacuum disconnect two piece axle shafts |
Vehicle fitment
Vehicle years and models are unknown for this seal. The front axle type on your vehicle decides fit, so match it to Dana 30 TJ, Dana 30 Reverse or Dana 44 axles.
Seals are not suited to a passenger side vacuum disconnect setup. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the front axle for a passenger side vacuum disconnect with a two piece axle shaft before fitting, because this seal is not compatible with that setup.
What’s included
Check the seal count and hardware against your installation before starting.











