Overview
The Omix-Ada 16534.23 is an inner axle oil seal for Dana 30 front axles. It fits the left or right side, replaces OE 43116, and is sold individually, with two needed per vehicle.
Omix-Ada’s description covers the 1972–1983 Jeep CJ5, 1972–1975 CJ6, 1976–1986 CJ7, 1981–1986 CJ8 Scrambler, 1984–2001 Cherokee (XJ), 1987–1995 Wrangler (YJ), 1997–2006 Wrangler (TJ) and 2007–2012 Wrangler (JK) models equipped with Dana 30 front differentials.
Key features
- Inner oil seal for Dana 30 front axles
- Fits the left or right side
- Replaces OE 43116
- Sold individually; two needed per vehicle
- Front inner position
- Omix-Ada part number OAI16534.23
Installing inner seals
An inner axle seal sits inside the Dana 30 axle housing, where it holds lubricant in and keeps dirt out of the axle shaft area. A leaking seal often shows up as grease on the inside of the wheel or on the brake components. Because the seal is inside the housing, the axle must be opened for replacement, so plan the job with the right tools and a clean workspace.
Inspect the axle shaft and bearing surfaces while the seal is out, and look for grooves or scoring where the seal lip rides. Use a seal driver so the new seal sits square, and fill the axle with the correct lubricant after installation. Check both sides, since two seals are needed per vehicle and both wear with time.
- Inspect the axle shaft for grooves
- Use a seal driver so the seal sits square
- Check both sides for leaks after the first drive
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | OAI16534.23 |
| Position | Front inner |
| Axle | Dana 30 front |
| Replaces | OE 43116 |
| Side | Left or right |
| Quantity | Two per vehicle |
Vehicle fitment
It fits the 1972–1983 Jeep CJ5, 1972–1975 CJ6, 1976–1986 CJ7, 1981–1985 Scrambler, 1984–2001 Cherokee (XJ), 1987–1995 Wrangler (YJ), 1997–2006 Wrangler (TJ), 2004–2006 Wrangler (LJ) Unlimited and Unlimited Rubicon, 2007–2012 Wrangler (JK), 1993–1998 Grand Cherokee (ZJ) and 1999–2001 Grand Cherokee (WJ) Laredo and Limited. The fitment applies to models equipped with Dana 30 front differentials. Confirm fit for your vehicle’s year, model and trim before ordering, especially for years and models outside these ranges.
Years and models outside these ranges are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
An inner seal sits within the axle housing, so fitting it means opening the Dana 30 front axle rather than a bolt-on swap. Use two per vehicle, one for each side.
What’s included
One seal, sold individually. Two are needed per vehicle.








