Select your vehicle
-13%

Pro Comp 2 Degree Shim – 99-200

Pro Comp Suspension

Shop Pro Comp Suspension Axle Shims on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 2 degree tapered driveline shim
  • Improves driveshaft angle
  • Without center pins
  • Universal fit

Description

Overview

The Pro Comp Suspension 99-200 is a 2 degree tapered shim that improves driveshaft angle. It is made to be placed between a mounting surface and a component to change the angle of the driveline.

Choosing the right shim depends on the driveline angle your vehicle needs after a lift.

Key features

  • 2 degree taper
  • Improves driveshaft angle
  • Built without center pins

Measuring driveshaft angle

A tapered shim changes the angle of a component at its mounting point, which in turn changes the angle of the driveline that passes through it. Understanding which joint is out of line comes before choosing the shim, because adding angle at the wrong point can make a vibration worse rather than better.

Measurement is the step most often skipped. Use an angle gauge on the pinion and on the transmission or transfer case output, then compare the readings with the driveshaft geometry after the lift. Recheck the numbers after the first few drives, since the suspension can settle and change the angles slightly.

  • Measure before choosing the shim angle
  • Check u-joints for wear before adding a shim
  • Re-check driveline runout after the first trail runs

Specifications

Brand Pro Comp Suspension
Part number 99-200
Degree 2 degree
Center pins Without center pins

Vehicle fitment

This shim is a universal fit. Because the correct angle depends on your driveline and lift height, measure the driveshaft angle before ordering.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

One 2 degree tapered shim.

Questions & Answers

What does the Pro Comp 99-200 shim do?

It is a 2 degree tapered shim that improves driveshaft angle. Pro Comp gives the taper as the purpose of the shim, so the thick and thin ends are what change the angle of the driveline at the mount.

Does the Pro Comp 99-200 have center pins?

No. It is supplied without center pins, so it is a plain tapered shim. Confirm that your mounting setup does not need pins before installing it.

Is the Pro Comp 99-200 a universal fit?

It is a universal fit. Because the correct angle depends on your driveline and lift height, measure the driveshaft angle your vehicle needs before installing a 2 degree shim.

Can a shim fix a driveline vibration by itself?

Sometimes, but only when the vibration comes from an angle problem. Measure the pinion and transfer case angles first, and check the u-joints for wear before adding a shim.

How do I install a driveshaft shim?

Loosen the mounting bolts, place the shim with its thick end oriented as the angle requires, then tighten the bolts to the correct torque for the fasteners. Re-check the angle after a few trail runs.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Pro Comp Suspension Axle Shims on Amazon