Overview
The Rigid Industries SR-Series Single Row 20 Deg. Flood LED Light is a 10-inch single-row light bar with a 20-degree flood pattern. The patented optics project almost 1000 feet, and the bar uses 10 white LEDs in a bracket-mounted housing.
The SR-Series uses ultra low power draw and runs on a 7 to 36 VDC input. It has a 50,000-hour life, compared with about 1,000 hours for halogen and 5,000 hours for xenon. The bar starts instantly, has no hot spots, and includes a plug-and-play wiring harness, switch and cast bracket.
Key features
- 20-degree flood beam with patented optics
- Single-row design in a 10-inch bar
- 10 white LEDs
- Input from 7 to 36 VDC
- Unbreakable polycarbonate lens and polyester powder-coat finish
- IP68 rating
Wiring a flood bar safely
A 7 to 36 volt input range covers most vehicle systems, but the bar still needs a fuse close to the battery or power source and a switch the driver can reach. Route the cable through grommets, keep it away from exhaust heat and moving suspension parts, and secure it with loom so it does not chafe on the frame.
Mounting a flood bar on a bumper or roof changes the aim and the load on the vehicle, so set the bracket and tighten the hardware before the first trip. After rough trails, recheck the bracket bolts and the cast bracket for cracks. Aim the flood pattern low for camp and trail work, and adjust it as the vehicle load changes.
Specifications
| Brand | Rigid Industries |
|---|---|
| UPC | 849774029790 |
| Series | SR-Series Single Row |
| Light type | LED light bar, sold as a 2-piece kit |
| Size | 10 inch |
| LED count | 10 white LEDs |
| Beam pattern | Flood, 20-degree |
| Input voltage | 7 to 36 VDC |
| Rated life | 50,000 hours |
| Ingress rating | IP68 |
| Mounting | Bracket |
| Finish | Black, polyester powder coat |
Vehicle fitment
The flood bar is not built for one vehicle, and the mounting point is chosen per vehicle. The bracket and plug-and-play harness let the owner set the bar on the bumper, roof or frame.
Installation notes
Use the included harness and switch, and secure the cast bracket before fitting the bar. Keep the cable away from moving parts, and check local rules on driving lights before using the bar on a road vehicle.
What’s included
The 2-piece kit includes the light bar, the plug-and-play wiring harness and switch, and the cast bracket.









