Overview
The RIGID Dually Side Shooter LED Flood Light Cube (part 262113, sold as a pair) is the D-SS PRO, a compact pod built for a wide spread beam. Rigid rates the pair at 47 watts, 5544 raw lumens and 84.4 m beam distance, with 7 LEDs in each light. The side shooter LEDs aim sideways from the housing to widen the pattern.
The D-SS PRO suits A-pillars, fog light locations and motorcycle applications, where a wide spread beam is more useful than long reach. Each pod carries side-aimed LEDs, so a pair gives wider coverage than one pod alone. Side LEDs on both sides of one fixture add light where a wide pattern is needed.
Key features
- Dually side shooter design with extra side-aimed LEDs
- Flood main optic for a wide spread beam
- Up to 120 degrees of horizontal coverage when paired
- Up to 102% more raw lumens depending on the optic chosen
- IP68 compliant housing with an impact resistant lens
- Harness, switch and mounting brackets included
Aiming wide spread lights
A wide flood pattern spreads light sideways more than forward, so it is most useful for close work, edges and corners rather than distant reach. Aim the pods level or slightly downward so the spread lights the nearby area without throwing glare into the eyes of other drivers. Because the side LEDs add light at the edges of the pattern, the aim should be checked from the driver’s seat after the mounts are tightened.
Mounting on an A-pillar or motorcycle is a balance between the bracket, the surface and the wire route. Make sure the surface can take the weight and vibration, and keep the cable clear of airbags, controls and moving parts. Use the switch so the pods can be turned off quickly when oncoming traffic approaches or when the light is not needed.
- Aim level or slightly down
- Check aim from the driver’s seat
- Keep cable clear of airbags and controls
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 262113 |
| UPC | 849774027451 |
| Beam pattern | Flood |
| Light type | LED, surface mount, bracket mount |
| Output | 5544 raw lumens |
| Power | 47 watts; 3.36 amp draw |
| LEDs | 7 LEDs |
| Beam distance | 84.4 m |
| Lens | Clear, impact resistant |
| Finish | Black housing |
| Ratings | IP68 compliant |
| Lifespan | Up to 50,000+ hours |
| Sold as | Pair |
Vehicle fitment
This pod is a universal light and is not sized for one model. It can go on A-pillars, fog light locations or motorcycles where the bracket and surface allow. Plan the mounting spot so the 84.4 m beam is not blocked by the body or windshield.
Installation notes
Harness and switch are included, so the pods can be wired to a switch. Use a fused circuit at 3.36 amps and check local rules before mounting auxiliary lights on public roads.
What’s included
A pair of D-SS PRO side shooter lights with a harness, switch and mounting brackets.









