Overview
The Rigid Industries SR-Series Single Row 20 Deg. Flood LED Light is a 6-inch single-row bar with a 20-degree flood pattern. It uses six white LEDs, and its patented optics project almost 1000 feet of light.
The SR-Series is ultra low power and runs on a 7 to 36 VDC input. The bar has a 50,000-hour life, compared with about 1,000 hours for halogen and 5,000 hours for xenon. It has no hot spots, no bouncing beams and an instant on and off, and it is IP68 rated.
The kit uses an unbreakable polycarbonate bracket and a durable polyester powder-coat finish. It comes as a 2-piece kit that includes the plug-and-play wiring harness, switch and cast bracket.
Key features
- 20-degree flood beam with patented optics
- Six white LEDs
- 6-inch single-row bar
- Input from 7 to 36 VDC
- IP68 rating
- Plug-and-play harness, switch and cast bracket
Choosing a mounting spot
A flood bar earns its place by lighting the ground close to the vehicle, so mounting height and angle matter more than raw output. Mount the bar where the beam clears the hood or bumper line and covers the trail in front of the tires. Aim it slightly down, since a beam pointed too high mostly lights up trees and haze.
Driving lights are often run with a light bar, a switch and a relay, and wiring the bar through a fused circuit protects the vehicle’s electrical system. Check that the bracket is tight after rough trails, because vibration loosens fasteners over time. A bar that is loose or moving will throw its beam unevenly even when the LEDs are working fine.
- Aim the beam low for close-in lighting
- Check the bracket fasteners after rough trails
- Use a relay when the wire run is long
- Keep the lens clean for full beam output
Specifications
| Brand | Rigid Industries |
|---|---|
| UPC | 849774029721 |
| Series | SR-Series Single Row |
| Light type | LED light bar, sold as a 2-piece kit |
| Size | 6 inch |
| LED count | 6 white LEDs |
| Beam pattern | Flood, 20-degree |
| Input voltage | 7 to 36 VDC |
| Rated life | 50,000 hours |
| Ingress rating | IP68 |
| Finish | Black, polyester powder coat |
| Mounting | Bracket |
Vehicle fitment
It is a universal fit and is not built for one vehicle. The cast bracket and harness let you choose the mounting spot, so pick a location that suits your vehicle.
Installation notes
Secure the cast bracket before wiring, then connect the included harness and switch. Keep the cable clear of moving parts and heat, and check local rules on driving lights before using the bar on a road vehicle.
What’s included
The 2-piece kit includes the 6-inch bar, the plug-and-play wiring harness and switch, and the cast bracket.









