Overview
The Rigid Industries SR-M Series Pro Surface Mount Spot LED Light in white, part number 942213, is a single-row mini light that mounts on a bracket. The SR-M PRO is a small, professional race output light that produces a focused spot pattern with the spot optic.
Improved LED technology gives the SR-M PRO up to 111 percent more raw lumens than before. It suits flood lighting on a toy hauler, handlebar lights on motorcycles and other power sports vehicles, and back bumper lighting on cars and trucks. Several optics are offered for the same housing, so the beam can be matched to the job.
Key features
- Spot optic for a focused, longer-reaching beam
- Single-row mini design
- Surface mount on a bracket
- Up to 111 percent more raw lumens than before.
- Clear lens in a white housing
- Blacked-out circuit boards and new branding on the current design
Spot beam placement tips
A spot pattern concentrates light into a tighter beam, so aim is critical. Set the light on level ground with the vehicle as it normally sits, then adjust the bracket until the hot spot falls on the path ahead rather than the sky. A spot aimed a little low lights the trail surface and the ruts, which helps with reading the terrain at speed. Check aim again after changing tires, suspension or load, since those shift the angle.
The bracket is the part that takes the stress. Attach it to a solid, flat section of the bumper, a roll bar or a bracket plate rather than thin sheet metal, and use a lock washer or thread locker on the fasteners. Route the wire so it is clipped away from the bracket hinge points and the exhaust. Water can enter the rear of the housing through a poorly sealed connector, so seal the plug well before the first crossing.
- Set aim on level ground before the first trail run
- Use a solid mounting point for the bracket
- Check the bracket bolts after rough sections
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 942213 |
| Series | SR-M Series Pro |
| Light type | LED light pod, sold as a single light |
| LED arrangement | Single row |
| Light shape | Rectangular |
| Mounting | Bracket, surface |
| Lens color | Clear |
| Housing color | White |
| Beam pattern | Spot |
| Bulb type | LED |
Vehicle fitment
The SR-M PRO spot light is a universal fit and is not built for one vehicle. It mounts on a bracket, so the mounting point is the owner’s choice. Confirm that the bracket location suits the body or bumper you pick.
Installation notes
Attach the bracket to a solid surface and route the wire away from moving parts before fastening. Use a fused circuit and check local rules on auxiliary lights before using the light on a road vehicle.
What’s included
The package contains one spot light with a bracket mount. A wiring harness is not included, so confirm the contents before fitting parts.
The light mounts on a bracket rather than flush, so the owner can set the angle and aim the spot where the trail needs it. Rigid offers the SR-M PRO with several optic choices, so the spot pattern is one option among others for the same housing.









