Overview
The Rigid Industries M-Series Dually 60 Deg. Diffusion LED Light is a set of two square lights with a 60-degree diffusion beam, made for flush mounting. The hybrid lens creates the 60-degree spread, which Rigid says reaches out about 70 meters, so the light is meant for area lighting rather than extreme distance.
Each light has four white LEDs. The M-Series is ultra low power, runs on a 10 to 36 VDC input and has a rated life of 50,001 hours, compared with about 1,000 hours for halogen and 5,000 hours for xenon. It also suits boating use as a compact area light.
Key features
- 60-degree diffusion beam from a hybrid lens
- Four white LEDs per light
- Square housing for flush mounting
- Unbreakable polycarbonate lens
- 6063 aluminum extrusion housing
- Durable UV polyester powder-coat finish
Area lighting with diffusion
A diffusion pattern spreads light across a wide area rather than reaching far down a trail. That makes it useful for lighting a work area, a campsite, a loading zone or the ground beside a vehicle, where a focused beam would leave gaps. Two lights placed on opposite corners give even coverage with less glare than a single bright light in the middle.
Flush mounting keeps the housing close to the surface, which reduces snag points but also limits airflow around the back of the light. Keep the mounting panel clear of mud and insulation buildup, and check the gasket each season. Use fuse protection sized to the wiring run, and inspect the lens for hazing after long exposure to sun, since clear polycarbonate can cloud over time and reduce output.
Specifications
| Brand | Rigid Industries |
|---|---|
| UPC | 849774027338 |
| Series | M-Series Dually |
| Light type | LED light, sold as a set of two |
| Light shape | Square |
| Mounting | Flush |
| Lens color | Clear |
| Beam pattern | 60-degree diffusion |
| LED count | 4 white LEDs per light |
| Input voltage | 10 to 36 VDC |
| Rated life | 50001 hours |
| Housing | 6063 aluminum extrusion |
| Lens | Unbreakable polycarbonate |
| Finish | Durable UV polyester powder coat |
Vehicle fitment
The M-Series Dually works on a range of vehicles, boats and machines rather than one model. Its flush mount needs a clean cut-out in the mounting surface, so the owner checks the panel on each boat, vehicle or machine it is used on.
Installation notes
Cut the flush opening to the housing size, then wire the pair through a fused circuit sized to the 10 to 36 VDC system. Keep the cable clear of moving parts, and check local rules on driving lights before using them on a road vehicle.
What’s included
The set holds two square diffusion lights. Check what is in the kit against your install before starting.









