Overview
The Rigid Industries SR-Series Single Row 10 Deg. Spot LED Light is a 6-inch single-row bar with a 10-degree spot beam. The hybrid spot optic concentrates the light into a focused beam, so the bar reaches farther down the trail or road than a wider pattern would.
The bar runs on 7 to 36 VDC and uses low power. Its rated life is 50,000 hours, compared with about 1,000 hours for halogen and 5,000 hours for xenon. It starts instantly, produces no hot spots and comes with a plug-and-play wiring harness, switch and cast bracket.
Key features
- 10-degree spot beam
- Patented hybrid optics
- 6-inch single-row bar
- Input from 7 to 36 VDC
- IP68 rating
- Plug-and-play wiring harness, switch and cast bracket
Spot beams on the trail
A 10-degree spot is narrow by design, so it works best when it lights the path ahead rather than the sides. On a trail, a spot helps you see obstacles at a distance and lets you read the line through a corner before you reach it. On a road, a spot should be aimed so it does not dazzle oncoming drivers, which means keeping it above the traffic line and adjusting the angle after installation.
Pairing a spot with a wider light is a common setup, since the spot handles distance while a flood fills the near area. If you add a second bar, match the mounting height so the two patterns blend, and use a separate fused circuit for each bar so one failure does not affect the other. Check aim and bracket tightness after the first few runs.
Specifications
| Brand | Rigid Industries |
|---|---|
| UPC | 849774029738 |
| Series | SR-Series Single Row |
| Light type | LED light bar, sold as a 2-piece kit |
| Size | 6 inch |
| LED count | 6 white LEDs |
| Beam pattern | Spot, 10-degree |
| Input voltage | 7 to 36 VDC |
| Rated life | 50,000 hours |
| Ingress rating | IP68 |
| Mounting | Surface, bracket |
| Finish | Black, polyester powder coat |
Vehicle fitment
It is a universal fit rather than a bar built for one vehicle. The cast bracket and harness let the owner position the 6-inch bar, and the spot should be aimed at the trail or road ahead.
Installation notes
Secure the cast bracket to a solid surface before wiring, then connect the included harness and switch. Keep the cable clear of moving parts and heat, and check local rules on driving lights before using the bar on a road vehicle.
What’s included
The 2-piece kit contains the 6-inch spot bar, the plug-and-play harness and switch, and the cast bracket.









