Overview
The Rigid Industries SR-Q Series LED Back Up Light is a flush-mount kit with two diffused single-row quad LED lights. The kit includes an extended wire harness and the necessary hardware, so it can be installed as a complete package for backup lighting.
The lights have a 6063 aluminum housing, a durable polycarbonate lens and a GORE pressure equalizing vent. They are IP68 certified, rated for zero UV emissions, and carry a 50,000-hour lifespan. They start instantly with no warm-up and are RoHS compliant.
Key features
- Diffused single-row quad lights
- Flush-mount design
- Extended wire harness and necessary hardware
- 6063 aluminum housing and durable polycarbonate lens
- GORE pressure equalizing vent
- IP68 certified, zero UV emissions, RoHS compliant
Flush mounting a back up light
A flush mount sits level with the panel, which keeps the light from catching brush or cargo. Measure the opening carefully, because a cut that is too large lets water and dust in around the housing, while a cut that is too small will not seat the light. Dry-fit the housing and check the gasket before sealing it, and make sure the lens clears any bumper or panel edge.
Route the harness away from the hitch, exhaust and moving parts, and secure it with clips so it cannot chafe. Seal every connector with dielectric grease or heat-shrink so moisture stays out of the splice. Back up lights are often regulated, so confirm the rules for your area before wiring a light to a vehicle used on public roads. Test the light with the engine off before final assembly.
Specifications
| Brand | Rigid Industries |
|---|---|
| UPC | 849774017711 |
| Series | SR-Q Series |
| Sold as | Kit with 2 LED lights |
| Light type | LED back up light |
| LED arrangement | Single row quad |
| Beam pattern | Diffused |
| Mounting | Flush |
| Housing | 6063 aluminum |
| Lens | Durable polycarbonate |
| Ingress rating | IP68 certified |
| Rated life | 50,000 hours |
Vehicle fitment
It is a universal fit rather than a light made for one vehicle. A flush mount needs a clean opening in the rear panel that matches the housing, so check the panel on each vehicle before cutting.
Installation notes
Use the extended wire harness and the included hardware for the flush install, and route the cable away from moving parts. Check local rules on back up lights, which are often regulated, before wiring them to a road-going vehicle.
What’s included
The kit includes two LED lights, an extended wire harness and the necessary hardware.









