Overview
The Smittybilt C1489QC-SS is a stainless nerf step set for Chevrolet Silverado and GMC Sierra trucks. It fits the 2015 to 2018 Silverado 1500 in Custom, LS, LT, LTZ and WT versions, the 2018 Silverado 2500 HD in LT, LTZ and WT, the 2015 to 2018 Sierra 1500 in Base, SLE and SLT, and the 2018 Sierra 2500 HD in Base, SLE and SLT.
The steps are a 4 or 6 step drop-down design built from a 3-inch main tube, with cleated step plates. The unit is rated for loads of up to 445 pounds and helps protect the rocker panels from being hit on the way in.
It is a one-piece design that bolts to the frame, with no brackets to pre-assemble. The mounting is intended to be quick, which suits an owner fitting the steps at home.
Key features
- Stainless steel finish
- Wheel-to-wheel length
- Four or six step drop-down design
- Three-inch main tube
- Cleated step plates
- Rated for loads up to 445 pounds
- One-piece frame-bolt design
- Helps protect rocker panels
Stainless care and wear
Stainless steel holds its appearance well, but road salt, mud and brake dust can leave spots if they sit on the surface. Rinsing the steps regularly and drying them with a soft cloth keeps the finish clean. Avoid abrasive pads that can scratch the surface, since scratches make later marks harder to clean away.
Cleated plates wear over time as boots and tread rub against them, and loose edges can catch clothing. Look for cracked welds, bent plates and bolts that back out after rough trips. Replacing a damaged step is simpler than repairing one, and the frame attachment points should be checked at the same time.
- Rinse salt and mud after winter driving
- Use a soft cloth, not abrasive pads
- Check cleated plates for bends or cracks
- Look for loose bolts after rough trips
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | C1489QC-SS |
| Finish | Stainless steel |
| Length | Wheel to wheel |
| Main tube | 3 inches |
| Step design | Four or six step drop-down with cleated plates |
| Load rating | Up to 445 pounds |
| Installation | One-piece unit bolts to frame |
Vehicle fitment
This nerf step fits the 2015 to 2018 Chevrolet Silverado 1500 in Custom, LS, LT, LTZ and WT versions, the 2018 Silverado 2500 HD in LT, LTZ and WT, the 2015 to 2018 GMC Sierra 1500 in Base, SLE and SLT, and the 2018 Sierra 2500 HD in Base, SLE and SLT.
The 2014 Silverado and Sierra, the 2019 and later trucks, and the 2001–2013 models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The nerf step unit.
















