Overview
The Smittybilt Sure Step 3-inch side bar in black powder coat, part number DN280-S4B, is sold as a pair. It fits the 2010 to 2019 Ram 2500 and 3500 trucks, including the 2010 Dodge Ram 2500 and 3500 models and the 2011 to 2019 Ram 2500 and 3500 in the versions below.
Five pins secure each non-slip polyester pad in a squashed step, so no metal is left exposed to rust. An oversize bolt attachment limits bounce, and the frame and body mount is rugged. These bars are custom fit for most vehicles, hardware is included, and most applications are no-drill.
Key features
- Sold as a pair
- 3-inch diameter side bar
- Black powder coat finish
- Non-slip polyester step pads
- Five-pin pad attachment
- No-drill installation on most applications
Running boards on heavy-duty trucks
A side bar on a three-quarter-ton or one-ton pickup works as a step first and a guard second. Trucks in this class sit high, so the bar gives a stable place to put a boot before reaching the grab handle or the cab door. Tubes that bolt firmly to the frame and body hold up better to repeated loading than thin brackets mounted to the sheet metal.
Before buying, think about how the bar will be used. Heavy loads from tools or gear placed on the step add stress to the mount, so a rugged frame connection matters. Non-slip pads help in wet or muddy weather. If the truck carries a service body or toolbox, check that the bar clears the body and the rear fender at full travel.
Once installed, check the bolts and pins periodically, especially after rough roads. Look for loose hardware, worn pad surfaces, and paint chips that could let moisture reach the tube. Wash off salt and mud to keep the black finish in good condition.
- Check clearance to the rear fender and body
- Re-tighten mounting bolts after the first few drives
- Touch up chips in the powder coat to slow corrosion
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | DN280-S4B |
| Tube | 3-inch diameter |
| Length | Cab length |
| Finish | Black powder coat |
| Sold | As a pair |
| Installation | No-drill on most applications; mounting hardware included |
| Fitment type | Direct fit |
Vehicle fitment
The side bars fit the 2010 Dodge Ram 2500 in the Laramie, SLT, SXT and TRX versions, the 2010 Dodge Ram 3500 in the Laramie and SLT versions, and the 2011 to 2019 Ram 2500 and 3500 in the matching versions.
Ram 1500 models and years outside 2010 to 2019 fall outside this range. Make sure your year, model and trim match before buying.
Installation notes
Most applications are no-drill. Confirm the frame and body mount on your Ram before installing the pair.
What’s included
A pair of 3-inch Sure Step side bars in black powder coat with mounting hardware.










