Overview
The Smittybilt FN1960-S4S is a stainless steel side bar, sold as a pair, for the 2004–2008 Ford F-150. It fits the FX2, FX4, Harley-Davidson Edition, Lariat, STX, 60th Anniversary Edition, XL and XLT versions of that generation. It is a cab-length bar with a 3-inch stainless tube.
It is a cab-length bar with a 3-inch stainless tube. The step pads are non-slip polyester, held in place by five pins set into a squashed step, so there is no exposed metal for rust to attack. The frame and body mount has an oversize bolt attachment to keep the tube from moving when it is used.
Installation requires no drilling on most applications, and the pair comes with its mounting hardware.
Key features
- Stainless steel finish
- Three-inch tube
- Cab-length design
- Non-slip polyester step pads
- Five-pin pad retention
- Frame and body mount with an oversize bolt attachment
- No-drill installation on most applications
- Sold as a pair
Stainless bars and daily use
A stainless tube holds a clean look in wet weather and road salt better than bare steel, but the brackets and fasteners are the parts most likely to corrode. Before fitting, clean the mating surfaces of the frame and body mount and inspect for scale or flaking metal. Fresh anti-seize on bolt threads makes future removal easier.
Step pads are the component riders feel most. Non-slip polyester should stay firm, and a pad that rocks, cracks or has pins backing out needs replacing. Keep spare pins and a small torque wrench in the toolbox so checks take minutes rather than an afternoon.
On a 2004–2008 F-150 with a lift or larger tires, measure the gap between the tire and the tube at full steering lock. Bars that sit too low can scrape on steep approaches, so adjust your driving line on rough trails.
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | FN1960-S4S |
| Finish | Stainless steel |
| Tube diameter | 3 inches |
| Length | Cab length |
| Step pads | Non-slip polyester, secured with five pins |
| Installation | No drilling on most applications |
| Quantity | Sold as a pair |
Vehicle fitment
It fits the 2004–2008 Ford F-150 in its FX2, FX4, Harley-Davidson Edition, Lariat, STX, 60th Anniversary Edition, XL and XLT versions.
The 2001–2003 F-150, the 2009–2014 F-150 and the Super Duty trucks are outside this fit. Check your truck’s year, model and trim against the fitment before ordering.
What’s included
Included in the set: two stainless bars, step pads and mounting hardware.










