Select your vehicle
-13%

Smittybilt Sure Step 3″ Diameter Side Bars (Stainless Steel) – DN240-S4S

Smittybilt

Shop Dodge Ram 1500 Nerf Steps on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits the 2002–2008 Dodge Ram 1500 and the 2003–2008 Ram 2500 and 3500
  • Stainless steel 3-inch Sure Step side bar with cab-length tube
  • Non-slip polyester pads held by five pins in a squashed step
  • No-drill installation on most applications, hardware included

Description

Overview

The Smittybilt DN240-S4S is a stainless steel Sure Step side bar for the 2002–2008 Dodge Ram 1500 and the 2003–2008 Ram 2500 and 3500. It fits the Ram 1500 in its Laramie, SLT, SRT-10, ST, SXT, Sport and TRX4 versions, and the Ram 2500 and 3500 in their Laramie, Power Wagon, SLT, ST, SXT, Sport and TRX4 versions.

The bar is a cab-length design with a 3-inch tube. The pads are non-slip polyester and are held by five pins in a squashed step. Smittybilt designed the frame and body mount with an oversize bolt attachment, which keeps the tube steady when a rider steps on it.

Smittybilt rates most applications as a no-drill install, and the mounting hardware is included, so the bar can be fitted without cutting into the frame on most of the listed trucks.

Key features

  • Stainless steel finish
  • Three-inch tube
  • Cab-length design
  • Non-slip polyester step pads
  • Five-pin pad retention with no exposed metal
  • Frame and body mount design
  • No-drill installation on most applications
  • Mounting hardware included

Before you buy

Before ordering a side bar, measure how far the step needs to reach and check whether the rocker area on your truck is clear. A cab-length bar covers the step between the front and rear doors, which suits daily use and light trail work. Compare the bar’s footprint with any running boards, rock sliders or tire carriers already mounted to the frame, since overlapping hardware can get in the way of the bolt pattern.

Because the frame and body mount uses oversize bolts, inspect the mounting points before installation, especially on older trucks that have seen off-road use. Rust or bent brackets can keep the tube from seating firmly. Tighten the supplied fasteners and recheck them after the first few drives, since bars under regular use can settle slightly.

Specifications

Brand Smittybilt
Part number DN240-S4S
Finish Stainless steel
Tube diameter 3 inches
Length Cab length
Step pads Non-slip polyester, secured with five pins
Installation No drilling on most applications

Vehicle fitment

It fits the 2002–2008 Dodge Ram 1500 in its Laramie, SLT, SRT-10, ST, SXT, Sport and TRX4 versions, and the 2003–2008 Ram 2500 and 3500 in their Laramie, Power Wagon, SLT, ST, SXT, Sport and TRX4 versions. The 1995–2001 Ram and the 2009 and later models are not covered. Confirm your vehicle’s year, model and trim before ordering.

The 1995–2001 Ram and the 2009 and later Ram trucks are not on this list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

Mounting hardware is included with the bar. No quantity is stated.

SKU: S/BDN240-S4S Categories: , ,

Fitment

VehicleYearsTrims
Dodge Ram 15002002–2008Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4
Dodge Ram 25002003–2008Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4
Dodge Ram 35002003–2008Laramie, SLT, ST, SXT, Sport, TRX4

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the DN240-S4S fit a 2006 Dodge Ram 2500 SLT?

Yes. The list covers the 2003 to 2008 Ram 2500 in its SLT version, so a 2006 SLT is within the listed range. Check the year and version against the full list before you order.

Does it fit a 2009 Ram 1500?

No. The list ends with the 2008 Ram 1500, so 2009 trucks are not covered by this part. The 2009 and 2010 models use different part numbers from the manufacturer.

Is the tube stainless?

Yes. The DN240-S4S is listed with a stainless steel finish on a 3-inch tube. It is a cab-length bar with five-pin step pads, and the mounting hardware is included.

How often should the side bar hardware be checked?

Check the hardware after the first few drives and then at regular intervals, especially after rough trail use. Look for loose bolts, cracked pad mounts and any movement at the frame or body mount. Retighten fasteners as needed and replace any pins or pads that show damage.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Dodge Ram 1500 Nerf Steps on Amazon